Abstract:Purpose. The subject of this study is the strength of the loaded units of mobile machines for flash butt welding by refining high-strength rails. The theme of the work is related to the development of a technique for strength calculating of the insulation of the central axis of these machines. The aim of the paper is to establish the mathematical dependence of the pressure on the insulation on the magnitude of deflections of the central axis under the action of the upset force. Design/methodology/approach. Using the Mohr’s method, the displacements of the investigated sections of the central axis under the action of the upset force and the equivalent load distributed along the length of the insulation were calculated. The magnitude of the load distributed along the length of the insulation equivalent to the draft force was determined from the condition that the displacements of the same cross sections are equal under the action of this load and under the action of the upset force. Results. An analytical expression for establishing the relationship between the pressure acting on the insulation and the magnitude of the upset force and the geometric dimensions of the structural elements of the machine was obtained. Based on the condition of the strength of the insulation for crushing, an analytical expression for establishing the relationship between the length of insulation and the size of the upset force, the geometric dimensions of the structural elements of the machine, and the physical and mechanical properties of the insulation material was obtained. Originality/cost. The proposed methodology was tested in the calculation and design of the K1045 mobile rail welding machine, 4 of which is currently successfully used in the USA for welding rails in hard-to-reach places.

Etract and analyze welding quality characteristic of AC rail flash butt welding with high- speed sampling

Welding Quality Monitoring of High Frequency Straight Seam Pipe Based on Image Feature

Investigation of Welding Residual Stress in Flash-Butt Joint of U71mn Rail Steel by Numerical Simulation and Experiment

Influence of Rail Metallurgy and Welding Parameterization on the Quality of Flash Butt Welds Done with Mobile Equipment

Testing the Spalling Defects on Rail Tread with Laser EMAT Ultrasonic

Mechanical and Tribological Behaviors of U75VG Rail Flash−Butt Welded Joint

Experimental Study of Static and Dynamic Loading Effects on Guided Wave-Based Intelligent Monitoring of Welded Rail Joints

Application of eddy current testing in the quantitative evaluation of the rail cracks

The sensitivity analysis of microstructure and mechanical properties to welding parameters for linear friction welded rail steel joints

Finite Element Analysis on the Temperature Field Distribution of Flash Butt Welding of Rail

Flash butt welding of bainite steel crossing with U71Mn steel rail

Quality Evaluation of Resistance Spot Welding Based on Dynamic Reactance Signal and Radar Diagram Method

Time frequency feature extraction of the arc energy for quality detection of the aluminum alloy double pulse MIG welding

Dynamic constitutive model of U75VG rail flash-butt welded joint and its application in wheel-rail transient rolling contact simulation

Data collecting system of pipe arc acoustic emission characteristics

Temperature field calculation of rail flash welding

Method for strength calculating of structural elements of mobile machines for flash butt welding of rails

The influence of technological parameters on the thermal cycle at butt flash welding of rails

Effects of rail flash-butt welding and post-weld heat treatment processes meeting different national standards on residual stresses of welded joints

Automatic Ultrasonic Flaw Detecting System for Locomotive Axles

Quality reliability analysis of flash welding joint of cold-rolled 50JW800 silicon steel strip