Abstract:Four-dimensional (4D) printing unlocks new potentials for personalized biomedical implantation, but still with hurdles of lacking suitable materials. Herein, we demonstrate a bioresorbable shape memory elastomer (SME) with high elasticity at both below and above its phase transition temperature ( T trans ). This SME can be digital light 3D printed by co-polymerizing glycerol dodecanoate acrylate prepolymer (pre-PGDA) with acrylic acid monomer to form crosslinked Poly(glycerol dodecanoate acrylate) (PGDA)-Polyacrylic acid (PAA), or PGDA-PAA network. The printed complex, free-standing 3D structures with high-resolution features exhibit shape programming properties at a physiological temperature. By tuning the pre-PGDA weight ratios between 55 wt% and 70 wt%, T trans varies between 39.2 and 47.2 °C while Young's moduli ( E ) range 40-170 MPa below T trans with fractural strain ( ε f ) of 170%-200%. Above T trans , E drops to 1-1.82 MPa which is close to those of soft tissue. Strikingly, ε f of 130-180% is still maintained. In vitro biocompatibility test on the material shows > 90% cell proliferation and great cell attachment. In vivo vascular grafting trials underline the geometrical and mechanical adaptability of these 4D printed constructs in regenerating the aorta tissue. Biodegradation of the implants shows the possibility of their full replacement by natural tissue over time. To highlight its potential for personalized medicine, a patient-specific left atrial appendage (LAA) occluder was printed and implanted endovascularly into an in vitro heart model. Statement of Significance 4D printed shape-memory elastomer (SME) implants particularly designed and manufactured for a patient are greatly sought-after in minimally invasive surgery (MIS). Traditional shape-memory polymers used in these implants often suffer from issues like unsuitable transition temperatures, poor biocompatibility, limited 3D design complexity, and low toughness, making them unsuitable for MIS. Our new SME, with an adjustable transition temperature and enhanced toughness, is both biocompatible and naturally degradable, particularly in cardiovascular contexts. This allows implants, like biomedical scaffolds, to be programmed at room temperature and then adapt to the body's physiological conditions post-implantation. Our studies, including in vivo vascular grafts and in vitro device implantation, highlight the SME's effectiveness in aortic tissue regeneration and its promising applications in MIS.

4D Printed Shape Memory Anastomosis Ring with Controllable Shape Transformation and Degradation

Modular 4D Printing Via Interfacial Welding of Digital Light-Controllable Dynamic Covalent Polymer Networks

Design-encoded dual shape-morphing and shape-memory in 4D printed polymer parts toward cellularized vascular grafts

Mass-producible near-body temperature-triggered 4D printed shape memory biocomposites and their application in biomimetic intestinal stents

4D-printed bilayer hydrogel with adjustable bending degree for enteroatmospheric fistula closure

4D Printed Self-Helix Structure Based on Internal Stress Reversibility

4D printed hydrogel scaffold with swelling-stiffening properties and programmable deformation for minimally invasive implantation

Digital Light 4D Printing of Bioresorbable Shape Memory Elastomers for Personalized Biomedical Implantation

4D Printed Cardiac Construct with Aligned Myofibers and Adjustable Curvature for Myocardial Regeneration

A 4D printed nanoengineered super bioactive hydrogel scaffold with programmable deformation for potential bifurcated vascular channel construction

4D printed nanoengineered super bioactive hydrogel scaffold with programmable deformation for potential bifurcated vascular channel construction

Shape Memory Effect of Four-Dimensional Printed Polylactic Acid-Based Scaffold with Nature-Inspired Structure

Shape Morphing of 4D-Printed Polylactic Acid Structures under Thermal Stimuli: An Experimental and Finite Element Analysis

Irreversible and Repeatable Shape Transformation of Additively Manufactured Annular Composite Structures

4D Printed Bilayer Helical Structures Mechanical Behaviors and Shape Memory Effects

4D printing of shape memory polybutylene succinate/polylactic acid (PBS/PLA) and its potential applications

4D printed shape-shifting biomaterials for tissue engineering and regenerative medicine applications

4D Printing of shape-memory polymeric scaffolds for adaptive biomedical implantation

Multimodal 3D printing of biodegradable shape memory elastomer resins for patient specific soft tissue repair

4D printing of biocompatible, hierarchically porous shape memory polymeric structures

Therapy with new generation of biodegradable and bioconjugate 3D printed artificial gastrointestinal lumen