Abstract:In the field of four-dimensional (4D) printing deformation, shape memory deformation can be achieved by changing printing parameters or materials. However, the effect of different thickness ratios between heterogeneous layers of the bilayer structure on deformation in 4D printing is still an unknown factor. A method for programming the fiber arrangement direction and the thickness ratio of the polylactic acid (PLA) layer and thermoplastic polyurethane (TPU) layer was proposed to achieve temperature-driven controllable deformation of the heterogeneous laminated bilayer structure. Three-dimensional (3D) printing method based on fused deposition modeling (FDM) technology was used to print homogeneous laminated structures, material distribution structures, and heterogeneous laminated bilayer structures, respectively. The thermal strain of homogeneous laminated structures with different fiber arrangement direction of PLA and TPU materials was analyzed. The effect of four printed material distribution structures on bending angle and bending response time of temperature-driven deformation in 4D printing was analyzed. The deformation performance of heterogeneous laminated bilayer structures with different thickness ratios between PLA layer and TPU layer were studied through a combination of theoretical analysis and experimental verification. The experimental results show that the bending curvature of the bilayer structure with the thickness ratio of 7:5 (PLA: TPU) is the maximum that is 1.11 cm −1 . Four cross-shaped components were designed to demonstrate the programmability of heterogeneous laminated bilayer structure in 4D printing, and the controllable deformation of the programmable bilayer structure was verified through the printed rosette structure. Therefore, programming the fiber arrangement direction and the thickness ratio of the heterogeneous bilayer structure is an effective strategy for achieving temperature-driven controllable deformation in 4D printing.

4D Printed Bilayer Helical Structures Mechanical Behaviors and Shape Memory Effects

4D Printed Self-Helix Structure Based on Internal Stress Reversibility

4D Printing of a Digital Shape Memory Polymer with Tunable High Performance

4D Printed Anisotropic Structures with Tailored Mechanical Behaviors and Shape Memory Effects

Complicated Deformation Simulating on Temperature-Driven 4D Printed Bilayer Structures Based on Reduced Bilayer Plate Model

A Common Simulating Model on Complicated Self-Deformation of 4D Printed Bilayer Structures

3D Printing of Shape Memory Poly(d,l‐lactide‐co‐trimethylene Carbonate) by Direct Ink Writing for Shape‐changing Structures

Microstructural Design for Enhanced Shape Memory Behavior of 4D Printed Composites Based on Carbon Nanotube/polylactic Acid Filament

Shape Memory Effect of Four-Dimensional Printed Polylactic Acid-Based Scaffold with Nature-Inspired Structure

DESIGN AND REALIZATION OF TEMPERATURE-DRIVEN SMART STRUCTURE BASED ON SHAPE MEMORY POLYMER IN 4D PRINTING

Programming the deformation of a temperature-driven bilayer structure in 4D printing

Temperature and Infill Density Effects on Thermal, Mechanical and Shape Memory Properties of Polylactic Acid/Poly(ε-caprolactone) Blends for 4D Printing

Temperature and Infill Density Effects on Thermal, Mechanical and Shape Memory Properties of Polylactic Acid/Poly(-caprolactone) Blends for 4D Printing

Shape Morphing of 4D-Printed Polylactic Acid Structures under Thermal Stimuli: An Experimental and Finite Element Analysis

Thermo-Mechanical Characterization of 4D-Printed Biodegradable Shape-Memory Scaffolds Using Four-Axis 3D-Printing System

Temperature-driven controllable deformation in 4D printing through programmable heterogeneous laminated bilayer structure

4D printing of shape memory polybutylene succinate/polylactic acid (PBS/PLA) and its potential applications

Shape Memory Behavior and Recovery Force of 4D Printed Textile Functional Composites

Effect of printing speed and part geometry on the self-deformation behaviors of 4D printed shape memory PLA using FDM

Characterization of Anisotropic Shape Memory Behavior of Thermoresponsive Components in 4D Printing

Favorable Thermoresponsive Shape Memory Effects of 3D Printed Poly(Lactic Acid)/Poly(ε‐Caprolactone) Blends Fabricated by Fused Deposition Modeling