Abstract:Pseudolites system is a good solution to the problem of navigation in indoor environments because of its great flexibility, strong signal power and high accuracy. In pseudolites system, the Time-Hopping - Direct Sequence Spread Spectrum (TH-DSSS) signal structure must be adopt to avoid near-far problem. For acquisition of TH-DSSS signals, traditionally, the receiver first tries to capture every single pulse by the method similar to the acquisition of the Global Navigation Satellite System (GNSS) signals. And after several successful acquisitions, the time-hopping rule should be estimated to determine the presence time of each TH-DSSS pulse, according to positions of detected pulses. However, the traditional method usually has a huge computational burden, furthermore, the acquisition method based on the detection of single pulse is unable to eliminate the effect of the short pulse which may result in incorrect estimation, especially for carrier Doppler. To overcome these defects, a new acquisition algorithm is proposed in this paper. In the proposed algorithm, by utilizing the feature that the coherent integration result of a short TH-DSSS pulse is robust to carrier Doppler estimation error, the three dimensional acquisition process is simplified to three one-dimensional searches. That is, the receiver could first estimate PRN code phase and time-hopping rule without considering the influence of Doppler. Then, according to estimation results of previous steps, a joint detection approach which utilizes multiple TH-DSSS pluses is proposed for Doppler estimation and both theoretical analysis and simulation results prove that this approach can effectively prevent error estimations. Finally, the proposed algorithm is compared with the existing approach from the literature and found to provide its low computational complexity.

Pulse Pattern Construction for Time-Hopping Pseudolites With the Generated Congruence Codes

Bit-Level Probabilistically Shaped Coded Modulation

On the Puncturing Patterns for Punctured Polar Codes

Pulse generation with programmable positions based on a phase-modulated optical frequency-shifting loop

A Hybrid ARQ Scheme Based on Equivalent Puncturing Patterns of Polar Codes

Characterization of the Photonic Generation of Phase-Coded Rf Signals Based on Pulse Shaping and Frequency-To-Time Mapping

Robust Time-Hopping Pseudolite Signal Acquisition Method Based on Dynamic Bayesian Network

Programmable Optical Pulse Repetition Rate Multiplication Via Spectral Phase Manipulation

QPulseLib: Accelerating the Pulse Generation of Quantum Circuit with Reusable Patterns

Pulse Intensity Coding Phase-Sensitive OTDR With Mismatched Filtering

A Fast Generation of Frequency Hopping Sequences

Pseudolites Pulsed Signals to Near-Far Problem and Compatibility

High accuracy and fast acquisition algorithm for pseudolites-based indoor positioning systems

Design of Digital Pulse-Position Modulation System

Resonance-Based Power-Efficient Pulse Generator Design with Corresponding Distribution Network.

Single Pulse Manipulations in Synthetic Time-frequency Space

Position modulation with random pulses

An Efficient Construction of Rate-Compatible Punctured Polar (RCPP) Codes Using Hierarchical Puncturing

A Novel Non-Coherent Q-Ary TH-PPM Transceiver

Interleaving of Local Code Replicas-Based Rapid Acquisition Method for Time Division Data Multiplexing Long Pseudo-Noise-Code Signals

Time-Frequency Hopping Sequences with Three No Hit Zones