Abstract:A significant fraction of the total power in highly synchronous systems is dissipated over clock networks. Hence, low-power clocking schemes are promising approaches for low-power design. We propose four novel energy recovery clocked flip-flops that enable energy recovery from the clock network, resulting in significant energy savings. The proposed flip-flops operate with a single-phase sinusoidal clock, which can be generated with high efficiency. In the TSMC 0.25-$\mu$m CMOS technology, we implemented 1024 proposed energy recovery clocked flip-flops through an H-tree clock network driven by a resonant clock-generator to generate a sinusoidal clock. Simulation results show a power reduction of 90% on the clock-tree and total power savings of up to 83% as compared to the same implementation using the conventional square-wave clocking scheme and flip-flops. Using a sinusoidal clock signal for energy recovery prevents application of existing clock gating solutions. In this paper, we also propose clock gating solutions for energy recovery clocking. Applying our clock gating to the energy recovery clocked flip-flops reduces their power by more than 1000× in the idle mode with negligible power and delay overhead in the active mode. Finally, a test chip containing two pipelined multipliers one designed with conventional square wave clocked flip-flops and the other one with the proposed energy recovery clocked flip-flops is fabricated and measured. Based on measurement results, the energy recovery clocking scheme and flip-flops show a power reduction of 71% on the clock-tree and 39% on flip-flops, resulting in an overall power savings of 25% for the multiplier chip.

Resonance-Based Power-Efficient Pulse Generator Design with Corresponding Distribution Network.

An Efficient, Repetitive Nanosecond Pulsed Power Generator with Ten Synchronized Spark Gap Switches

Research on low power technology based on Multi Bit Flip Flop

A Pulse-Generator-Free Hybrid Latch Based Flip-Flop (PHLFF)

The High Performance and Low-Power Circuit Design Based on Pulse Latch

Design of Flip-Flops with Clock-Gating and Pull-Up Control Scheme for Power-Constrained and Speed-Insensitive Applications.

Timing-aware Clock Gating of Pulsed-Latch Circuits for Low Power Design.

A Highly Efficient Conditional Feedthrough Pulsed Flip-Flop for High-Speed Applications

A 0.35v 1.3pj/cycle 20mhz 8-Bit 8-Tap Fir Core Based on Wide-Pulsed-Latch Pipelines

Novel low-power pulse generators for explicit-pulse triggered flip-flops

Clock Controlled Hybrid-latch Flip-Flops Design

Pulsed-Latch Utilization for Clock-Tree Power Optimization

Design of A Low-Power Pulse-Triggered Flip-Flop with Conditional Clock Technique

Low Power Pulse-Triggered Flip-Flop Based on Clock Triggering Edge Control Technique

Power-efficient Dual-Edge Implicit Pulse-Triggered Flip-Flop with an Embedded Clock-Gating Scheme.

Design of Low Power and High Performance Explicit-Pulsed Flip-Flops

LECTOR Based Clock Gating for Low Power Multi-Stage Flip Flop Applications

Ultra Low-Power Clocking Scheme Using Energy Recovery and Clock Gating

A PVT-Aware and Low Power Pulse-Triggered Flip-Flop

Ultra-low-voltage Low-power Self-adaptive Static Pulsed Latch

LOW CLOCK-SWING TSPC FLIP-FLOPS FOR LOW-POWER APPLICATIONS