Abstract:A significant fraction of the total power in highly synchronous systems is dissipated over clock networks. Hence, low-power clocking schemes are promising approaches for low-power design. We propose four novel energy recovery clocked flip-flops that enable energy recovery from the clock network, resulting in significant energy savings. The proposed flip-flops operate with a single-phase sinusoidal clock, which can be generated with high efficiency. In the TSMC 0.25-$\mu$m CMOS technology, we implemented 1024 proposed energy recovery clocked flip-flops through an H-tree clock network driven by a resonant clock-generator to generate a sinusoidal clock. Simulation results show a power reduction of 90% on the clock-tree and total power savings of up to 83% as compared to the same implementation using the conventional square-wave clocking scheme and flip-flops. Using a sinusoidal clock signal for energy recovery prevents application of existing clock gating solutions. In this paper, we also propose clock gating solutions for energy recovery clocking. Applying our clock gating to the energy recovery clocked flip-flops reduces their power by more than 1000× in the idle mode with negligible power and delay overhead in the active mode. Finally, a test chip containing two pipelined multipliers one designed with conventional square wave clocked flip-flops and the other one with the proposed energy recovery clocked flip-flops is fabricated and measured. Based on measurement results, the energy recovery clocking scheme and flip-flops show a power reduction of 71% on the clock-tree and 39% on flip-flops, resulting in an overall power savings of 25% for the multiplier chip.

Clock Controlled Hybrid-latch Flip-Flops Design

A Clock Isolation Technique for Low Power SoC Design

Research on low power technology based on Multi Bit Flip Flop

A Pulse-Generator-Free Hybrid Latch Based Flip-Flop (PHLFF)

Design of Flip-Flops with Clock-Gating and Pull-Up Control Scheme for Power-Constrained and Speed-Insensitive Applications.

Design of A Low-Power Pulse-Triggered Flip-Flop with Conditional Clock Technique

Power-efficient Dual-Edge Implicit Pulse-Triggered Flip-Flop with an Embedded Clock-Gating Scheme.

A 2ghz Programmable Counter with New Re-Loadable D Flip-Flop

Design of Low Power and High Performance Explicit-Pulsed Flip-Flops

Low Clock Swing D Flip-Flops Design by Using Output Control and MTCMOS

Optimization of explicit-pulsed flip-flops for high performance

Low-power level converting flip-flop with a conditional clock technique in dual supply systems.

Ultra Low-Power Clocking Scheme Using Energy Recovery and Clock Gating

Design of Novel, Semi-Transparent Flip-Flops (STFF) for High Speed and Low Power Application

Design and Analysis of Low-Power and Area-Efficient Master-Slave Flip-Flop

LOW CLOCK-SWING TSPC FLIP-FLOPS FOR LOW-POWER APPLICATIONS

LECTOR Based Clock Gating for Low Power Multi-Stage Flip Flop Applications

Low-Voltage and Low-Power True-Single-Phase 16-Transistor Flip-Flop Design

A New Type of High-Performance Low-Power Low Clock-Swing TSPC Flip-Flop

New Method for Low Power Sequential Circuit Design Based on Clock Gating

Design of D flip-flops with low power-delay product based on FinFET