Abstract:With the development of wide bandgap devices, the research and development of wide-frequency, high-efficiency, high-power-density three-phase inverters can play a positive role in the fields of electric vehicles, and microgrid. However, existing three-phase inverter schemes struggle to keep balance among wide output frequency range, high efficiency, high power density, and low EMI, while maintaining simple hardware structure and control strategies. In this article, based on the three-phase two-level inverter topology with dc-link connected output capacitors, a novel triangular current mode discontinuous pulsewidth modulation (TCM-DPWM) method is proposed. This method achieves the aforementioned advantages with a simple hardware and offers higher efficiency compared to existing modulation techniques. Initially, a smoothed DPWM method is introduced to enable smooth transitions at unsmooth points. Building on this method, a TCM-based approach is further proposed to achieve zero voltage switching (ZVS) soft-switching, significantly reducing the turn-on losses of the switching devices. As the connection to dc-link of the output capacitors may lead to substantial input current ripple, two methods using resonant input filter and split output capacitors are presented to reduce this ripple. Employing the proposed methods, a prototype using GaN devices is constructed, achieving a full-load (490 W) efficiency of 98.478% and a power density of 245 W/in(3). The prototype could reach an output frequency of up to 400 Hz, with the input current ripple reduced to about 10%.

MHz-Driven Snubberless Soft-Switching Current-Fed Multiresonant DC-DC Converter

A GaN-based MHz Active Clamp Flyback Converter with Adaptive Dual Edge Dead Time Modulation for AC-DC Adapters.

A New ZVCS Resonant Voltage-Fed Push-Pull Converter for Vehicle Inverter Application

A Novel Dual-Llc Resonant Soft Switching Converter For Super High Frequency Induction Heating Power Supplies

Zero Voltage Dual-LLC Resonant Soft Switching Converter for Super High Frequency Induction Heating Power Supplies

A multiplicator ZCS turn on boost converter with high-efficiency and high-voltage-gain

MHz Level Two-Stage ZVS DC-DC Converter with Wide Input and Output Voltage Ranges

Hybrid SiC-Si DC–AC Topology: SHEPWM Si-IGBT Master Unit Handling High Power Integrated with Partial-Power SiC-MOSFET Slave Unit Improving Performance

Current-Feed Single-Switch Forward Resonant DC Transformer (DCX) with Secondary Diode-Clamping.

A 98.4% Efficiency 380V-12V DCX with 1.3kw/in3 Power Density Using Low NFoM Devices and Resonant Drive Transformer

A Current-Fed Multiresonant Converter with Low Circulating Energy and Zero-Current Switching for High Step-Up Power Conversion

High Efficiency High Density 1 MHz 380–12 V DCX with Low FoM Devices

A novel current-feed soft-switching two-switch forward resonant DC-DC Transformer (DCX)

High Frequency Multicell Cascaded Quasi-Square-Wave Boost Converter

A GaN-based Single-switch Forward Resonant DCX With ZVZCS Winding-clamping

A 2-MHz 9–45-V Input High-Efficiency Three-Switch ZVS Step-Up/-Down Hybrid Converter

A Quasi-Square-Wave Modular Multilevel Resonant DC/DC Converter With ZCS and Current-Shaping Capacity for High Step-Ratio Application

Multiratio-Multiresonance Switched-Capacitor Step-Down Converter for DC Bus Voltage Conversion

Snubberless Bidirectional DC–DC Converter with New CLLC Resonant Tank Featuring Minimized Switching Loss

A Single-Switched High-Switching-frequency Quasi-Resonant Flyback Converter with Zero-Current-switching and Valley-Switching

Smoothed TCM-DPWM and Input Current Ripple Reduction for Three-Phase DC-AC ZVS Inverters