Abstract:This paper presents the effects of alkali-activated blast furnace slag and fly ash (AASF) paste added with waste ceramic powder (WCP) on mechanical properties, weight loss, mesoscopic cracks, reaction products, and microstructure when exposed to 300, 600, and 900 °C. Using waste ceramic powder to replace blast furnace slag and fly ash, the replacement rate was 0–20%. The samples cured at 45 °C for 28 days were heated to 300, 600, and 900 °C to determine the residual compressive strength and weight loss at the relevant temperature. We evaluated the deterioration of the paste at each temperature through mesoscopic images, ultrasonic pulse velocity (UPV), thermogravimetric analysis (TG), Fourier transform infrared (FTIR) spectroscopy, X-ray diffraction (XRD), and with a scanning electron microscope (SEM). Relevant experimental results show that: (1) with the increase in waste ceramic powder content, the compressive strength of samples at various temperatures increased, and at 300 °C, the compressive strength of all the samples reached the highest value; (2) the residual weight increased with the increase in the content of the waste ceramic powder; (3) with a further increase in temperature, all the samples produced more mesoscopic cracks; (4) at each temperature, with the rise in waste ceramic powder content, the value of the ultrasonic pulse velocity increased; (5) the TG results showed that, as the content of waste ceramic powder increased, the formation of C-A-S-H gel and hydrotalcite decreased; (6) XRD and FTIR spectra showed that, at 900 °C, the use of waste ceramic powder reduced the formation of harmful crystalline phases; (7) the SEM image showed that, at 900 °C, as the content of waste ceramic powder increased, the compactness of the sample was improved. In summary, the addition of waste ceramic powder can improve the mechanical properties of the alkali-activated paste at high temperatures, reduce the occurrence of cracks, and make the microstructure denser.

Effect of modified coal tar pitch addition on the microstructure and properties of Al2O3–SiC–C castables for solid waste incinerators

Effect of Carbon Black Content and Firing Atmosphere on the Properties and Microstructure of Al2O3-SiC-C Castables

Effects of SiCnw/Al2O3 composite powders on properties of Al2O3–SiC refractory castables

Effects of different carbon-containing calcium aluminate cements on the microstructure and properties of Al2O3–SiC–C castables

Effect of pretreated Al-Si alloy powder on the microstructure and properties of Al 2 O 3 -SiC-C castables for iron runner

Enhancing the Oxidation Resistance of Al2O3-SiC-C Castables via Introducing Micronized Andalusite

Effect of carbon black on corrosion resistance of Al2O3–SiC–C castables to SiO2–MgO slag

Improving the anti-oxidation and water wettability of graphite through the design of coating structure for the preparation of Al2O3–SiC–C castables

Oxidation resistance of Al2O3–SiC–C castables with different grades of andalusite

Microstructure and enhanced slag resistance of Al2O3–SiC–C refractory castables with addition of ammonium metatungstate

Preparation and properties of alumina-carbon castables using SiC nanofiber coated graphite flake

Enhancing mechanism of improved slag resistance of Al2O3-spinel castables added with pre-synthesized (Al,Cr)2O3 micro-powder

Synthesis of high belite sulfoaluminate cement with high volume of mixed solid wastes

Restructuring-diffusion mechanism of calcium alumino-titanate in CaAl12O19–MgAl2O4–Al2O3 castables

Effect of Waste Ceramic Powder on the Properties of Alkali–Activated Slag and Fly Ash Pastes Exposed to High Temperature

Catalytic carbon-bed sintering of CNTs/calcium aluminate cement and its effects on thermal mechanical properties of refractory castables

Preparation of CaCO3 coated corundum aggregates by dip-coating and heat treatment and its effects on the properties and microstructures of Al2O3–MgO castables

Microstructural evolution and properties enhancement of SiC refractory castables bonded with the special CNFs/calcium aluminate cement

Effect of silicon powder-modified tabular alumina aggregates on the mechanical properties and microstructures of carbon-bonded alumina refractories

Effect of CO2 atmosphere on Ca-containing mineral transformation behaviors during a Ca dominated coal co-firing with a Si/Al dominated coal in oxy-fuel condition

Effect of composite micro-powder added with α-Al2O3 and zirconium basic carbonate on the structure and properties of corundum castable