Abstract:Lithium-ion batteries are essential batteries for electric vehicle drive systems. Such batteries must provide stable performance over a long period of time. Therefore, the degradation or aging of the battery capacity must be improved. In the case of the current graphite anodes, graphite coated with an amorphous layer is used. It is known that the amorphous layer can reduce the irreversible capacity loss caused by the solid electrolyte interphase (SEI) layer. The amorphous carbon layers reduce the initial capacity due to higher electrical resistance. In this study, we aim to develop a buffer layer using nitrogen-containing graphene that would prevent the increase in electrical resistance while maintaining the amorphous structure. Coatings with different film thicknesses were prepared by using the solution plasma method. The thinnest sample was oven sintered to optimize the structure, especially the surface and interface of the layer. The battery capacity from charge-discharge experiments and the resistance change of each part from electrochemical impedance measurements were evaluated. The results showed that the coating layer increased the electrical resistance of the graphite anode. On the other hand, the resistance of the SEI layer was reduced by the coating layer. It can be predicted that the addition of the coating layer will increase the total charge transfer resistance (R ct) of the cell but will also improve the period average capacity in the long run. To be used as a practical material, the film thickness would need to be further reduced, and the balance between the loss of charge transfer resistance and the gain of SEI layer resistance would need to be further optimized.

Synthesis Of Nitrogen-Doped Graphene Films For Lithium Battery Application

N-Doped Graphene Quantum Dots Supported by Carbon Nanotubes Grown on Carbon Clothes for Lithium Storage

Modality-Tunable Exfoliated N-Doped Graphene as Effective Electrolyte Additive for High-Performance Lithium-Sulfur Batteries

Superhigh Capacity and Rate Capability of High-Level Nitrogen-Doped Graphene Sheets As Anode Materials for Lithium-Ion Batteries

Graphdiyne Containing Atomically Precise N Atoms for Efficient Anchoring of Lithium Ion

Enhanced Lithium Storage Performance of Graphene Nanoribbons Doped with High Content of Nitrogen Atoms.

N-doped Graphene As an Efficient Electrocatalyst for Lithium-Thionyl Chloride Batteries

Nitrogen-Deficient Graphitic Carbon Nitride with Enhanced Performance for Lithium Ion Battery Anodes.

N-Doped Graphdiyne Coating for Dendrite-Free Lithium Metal Batteries

Graphene/N-doped carbon sandwiched nanosheets with ultrahigh nitrogen doping for boosting lithium-ion batteries

Effect of Nitrogen Dopant Agents in the Performance of Graphene-Based Cathodes for Li-S Batteries

Ultrathin graphitic C3N4 lithiophilic nanosheets regulating Li+ flux for lithium metal batteries

Controlled graphene interfacial carbon nitride preparation for carbon negative electrodes of lithium-ion batteries

Fabrication of Highly N-Doped Graphene-Like Carbon Templated from G-C3n4 Nanosheets As Promising Li-ions Battery Anode

Reconfiguration of the Charge Density Difference of Nitrogen-Doped Graphene by Covalently Bonded Cu-N4 Active Sites Boosting Thermodynamics and Performance in Aprotic Li-CO2 Battery

Cascading Boost Effect on the Capacity of Nitrogen-Doped Graphene Sheets for Li- and Na-Ion Batteries

High Rate Capability of TiO2/nitrogen-doped Graphene Nanocomposite As an Anode Material for Lithium–ion Batteries

Nitrogen-Doped Carbon Nanothin Film as a Buffer Layer between Anodic Graphite and Solid Electrolyte Interphase for Lithium-Ion Batteries

Facile synthesis of carbon particles composed of N-doped carbon nanotube and their application in lithium-ion batteries

Nickel‐Catalyzed Synthesis of 3D Edge‐Curled Graphene for High‐Performance Lithium‐Ion Batteries

Lithiophilic Sites in Doped Graphene Guide Uniform Lithium Nucleation for Dendrite-Free Lithium Metal Anodes