Abstract:A mechanism-based model is established to describe gas desorption/diffusion/flow through coal around the drainage borehole.Effects of parametric sensitivity on drainage performance are evaluated by numerical simulations and mine site measurements.The control mechanism of gas drainage production and air leakage changes dynamically with gas pressure depletion.Sealing up coal wall around the borehole can linearly reduce drainage air leakage.Underground gas extraction from coal formations has triple-effects involving mining safety, low-carbon gas capture and greenhouse gas control. Air leakage around the drainage borehole is a serious problem that continuously affects gas drainage performance. In this study, mine site measurement of gas drainage data is firstly performed in coal mine, and then a mechanism-based model is proposed to theoretically describe gas desorption and diffusion and flow through coal around the drainage borehole. Further, the propose model is numerically solved and verified with borehole drainage data measured in mine site. Followed this, the validated mechanism-based model is implemented to conduct parametric studies. The results showed that: (a) as the fracture permeability increases from 3 × 10−22 m2 to 3 × 10-14 m2, the air leakage flux increases from 7355 m3/d to 18,303 m3/d, and the gas concentration decreases from 46.9 % to 12.7 %, it indicates that changing the permeability around the borehole may be a wise strategy to control air leakage; (b) the coal matrix parameters (including permeability, sorption constant and radius of matrix) have a dynamic impact on gas drainage performance at the different stage of gas drainage. For example, the increment of methane production induced by increasing the sorption constants does not exceed 3.3 % at the drainage time ∼0.34 day; while the growth increases to more than 19.5 % at the drainage time ∼ 9.75 days; (c) at the initial stage of extraction gas production is mainly determined by the fracture flow. A higher permeability of coal fracture will incur more air leakage flux, reducing gas concentration in drainage borehole; (d) whereas, the matrix parameters dominate gas flow at a later stage. Increasing matrix permeability, sorption property or decreasing the matrix radius will enhance the gas exchange flux from the pore system of coal matrix to the fracture system, subsequently incurring a higher concentration/production of drainage gas. The simulated result and field tests demonstrates that sealing on the coal wall around the borehole can block a portion of air leakage paths and reduce air leakage linearly, which illuminates a more efficient strategy to minimize air leakage for underground gas extraction.

N 2 injection to enhance gas drainage in low-permeability coal seam: A field test and the application of deep learning algorithms

Investigation on Key Parameters of N2 Injection to Enhance Coal Seam Gas Drainage (N2-ECGD)

Underground coal seam gas displacement by injecting nitrogen: Field test and effect prediction

Numerical investigation of flue gas injection enhanced underground coal seam gas drainage

Modeling Study of Enhanced Coal Seam Gas Extraction via N2 Injection Under Thermal-Hydraulic-Mechanical Interactions

Experimental Investigations on Enhanced Coal Seam Methane Extraction by Injecting Gas: A Review

A Heat Transfer Model of High-Temperature Nitrogen Injection into a Methane Drainage Borehole

Modeling and coupling analysis of enhanced coalbed methane recovery by gas injection

Pressure of different gases injected into large-scale coal matrix: Analysis of time–space dependence and prediction using light gradient boosting machine

A Case Study of Gas Drainage to Low Permeability Coal Seam

A Novel Failure Control Technology of Cross-Measure Borehole for Gas Drainage: A Case Study

A dynamic evaluation technique for assessing gas output from coal seams during commingling production within a coalbed methane well: a case study from the Qinshui Basin

Optimization and Application of Water Injection Process in Gas-Bearing Coal Seam

High-pressure water and gas alternating sequestration technology for low permeability coal seams with high adsorption capacity

Characteristics of Seepage and Diffusion in Gas Drainage and Its Application for Enhancing the gas utilization rate

Dynamic Monitoring of Induced Strain during N 2 -ECBM of Coal with Different Gas Contents

Synergistic ECBM extraction technology and engineering application based on hydraulic flushing combing gas injection displacement in low permeability coal seams

Experimental study on enhanced coal seam gas extraction by uniform pressure/pulse pressure N 2 injection

Evaluation of underground coal gas drainage performance: Mine site measurements and parametric sensitivity analysis

A study on the carbon dioxide injection into coal seam aiming at enhancing coal bed methane (ECBM) recovery

Effective means to alleviate the greenhouse effect: case study of history match simulations on a brief CO2 injection into less-deep low-rank coal seams