Pressure of different gases injected into large-scale coal matrix: Analysis of time–space dependence and prediction using light gradient boosting machine

Bin Zhou,Jiang Xu,Feng Han,Fazhi Yan,Shoujian Peng,Qixian Li,Feng Jiao

DOI: https://doi.org/10.1016/j.fuel.2020.118448

IF: 7.4

2020-11-01

Fuel

Abstract:<p>The pore pressure in the coal seam during gas injection affects the coalbed methane (CBM) recovery and increases the risk of coal mine disasters. However, the limitations of conventional experimental methods hinder the direct characterization of gas pressure evolution during CO₂ or N₂ injection. In this study, a large-scale coal matrix was used to conduct experiments on different gases, focusing on the time–space dependence of the gas pressure during gas injection and adsorption. Finally, the gas pressure was predicted using a decision tree model based on a light gradient boosting machine (LGBM). The results showed that in the early stage of gas injection, it is difficult to increase the gas pressure in the coal matrix. As the gas pressure increases, the injection of CO₂ or N₂ becomes increasingly difficult. In the later stage, a low-volume gas injection will lead to higher gas pressure. Because of the different adsorption capacity of CO₂ or N₂, the decay rate of N₂ injection is considerably lower than CO₂ injection. The direction parallel to the inlet end produces the highest pressure difference. The size of the CBM seam can affect the pore pressure. As the gas adsorption capacity decreases, the pressure difference in each direction gradually decreases. Further, the LGBM can efficiently predict the pressure changes during gas injection and determines the time–space dependence of the pressure for different gases. The proposed method based on the results and the LGBM model facilitates the understanding of gas migration and pore pressure changes during gas-induced CBM extraction.</p>

energy & fuels,engineering, chemical