Abstract:This study evaluated the potential effect of cellulose nanocrystal and coated polyethylene fiber on the mechanical properties of mortar. Two kinds of cellulose nanocrystals (CNC) directly as Nano-materials, and indirectly as film coated onto the polypropylene fibers were employed as cement-based reinforcement materials. The fluidity, flexural and compressive strength, and the microstructure of each specimen were measured. In the direct method, mortar mixed with the CNC containing carboxyl groups (CNC-C) showed superior properties compared to the CNC containing sulfo groups (CNC-S). The addition of CNC impacted the process of hydration and compactness of hydration products. The results of X-Ray polycrystalline diffractometer (XRD) and heat of hydration showed that CNC accelerated hydration process. Energy spectrum analysis (EDS) measured ratio of calcium to silicon (C/S) of calcium silicate hydrate (C-S-H) and proved that CNC-C increased the tightness of C-S-H while CNC-S decreased. The results of scanning electron microscopy (SEM) indicated that cellulose nanocrystals were interspersed in C-S-H, forming Nano-bridge and arresting Nano-crack. In the indirect method, the maximum increase in flexural strength of sample between all groups was the specimen that adding 0.3% (volume ratio of fiber to mortar) of CNC-C coated polypropylene fibers. The flexural and compressive strength of the mortar were increased by 22.81% and 10.65% compared to the control, respectively. The results of SEM indicated that coating enhanced bond of the fibers/matrix. Molecular dynamics simulation (MD) analyzed the binding energy, microstructure, dynamic characteristics and adsorption conformation between two CNCs and C-S-H at the molecular scale. MD presented clearly that the adsorption energy between CNC-S and C-S-H was much smaller than CNC-C and C-S-H. This was identical with CNC-C enhancing the mechanical properties of the mortar and CNC-S reducing the mechanical properties.

The influence of cellulose microcrystals and nanofibrils in XSBR polymers on the mechanical properties of jute textile-reinforced cementitious composites

MONTMORILLONITE REINFORCED SBR AND EFFECT ON THE VULCANIZATION OF RUBBER

Jute textiles with enhanced interfacial bonding as reinforcement for cementitious composites

Effects of Heat Treatment on Mechanical Properties of Jute Fiber–Reinforced Polymer Composites for Concrete Confinement

Effect of Natural Fibre Reinforced Polymers on Confined Compressive Strength of Concrete

Nano-clay treatment of jute fiber for reinforcement in polymer composites: Mechanical, morphological, and thermo-kinetic analysis

Effect of Jute Fiber Modification on Mechanical Properties of Jute Fiber Composite

Effect of Chemical Treatments on the Mechanical Properties of Jute/Polyester Composites

Experiment and molecular dynamics simulation of functionalized cellulose nanocrystals as reinforcement in cement composites

Effect of cellulose micro/nanofibrils and carboxylated styrene butadiene rubber coating on sack kraft paper

The Mechanical Properties of Jute/PLA Composites Combining Nano Polymerized Styrene Butadiene Rubber Modified by Coupling Agents

Jute Fiber-Reinforced Polymer Tube-Confined Sisal Fiber-Reinforced Recycled Aggregate Concrete Waste

Reinforced cementitious composite using viscose rayon fiber from textile industry waste

Mechanical behavior of textile reinforced concrete with newly developed mineral-impregnated carbon fabrics submitted to elevated temperatures

Effects of microfibre parameters on the tensile properties of fabric-reinforced cementitious mortar

Bond Investigation Of Hybrid Textile With Self-Compacting Fine-Grain Concrete

Mechanical behavior of a cementitious composite incorporating flax fibers treated with citric acid

Natural Cellulosic Fiber Reinforced Concrete: Influence of Fiber Type and Loading Percentage on Mechanical and Water Absorption Performance

Comparative study for efficacy of chemically treated jute fiber and bamboo fiber on the properties of reinforced concrete beams

Comprehensive insights on mechanical properties of natural–synthetic fibers with MWCNT nano-composite

Effect of acid treatment of eucalyptus fibers for improved poly(3-hydroxybutyrate) nanocomposites