Abstract:Accurate prediction of the self-propulsion performance is one of the most important factors for energy-efficient design of a ship. In general, the hydrodynamic performance of a full-scale ship could be achieved by model-scale simulation or towing tank test with extrapolations. With the development of CFD methods and computing power, directly predict ship performance with full-scale CFD is an important approach. In this article, a numerical study on the full-scale self-propulsion performance with propeller operating behind ship at model- and full-scale is presented. The study includes numerical simulations using RANS method with double-model and VOF model respectively and scale effect analysis based on overall performance, local flow fields and detailed vortex identification. Verification study on grid convergence is also performed for full-scale simulation with global and local mesh refinements. And a series of sea trail tests were performed to collect reliable data for the validation of CFD predictions. The analysis of scale effect on hull-propeller interaction shows that the difference on hull boundary layer and flow separation is the main source of scale effect on ship wake. And the results of the fluctuations of propeller thrust and torque along with circulation distribution and local flow field show that propeller’s loading is significantly higher for model-scale ship. It is suggested that the difference on vortex evolution and interaction is more pronounced and have larger effects on ship’s powering performance at model-scale than full-scale according to the simulation results. From the study on self-propulsion prediction, it could be concluded that the simplification on free surface treatment does not only affect the wave-making resistance for bare hull but also the propeller performance and propeller induced ship resistance which can produced up to 5% uncertainty to the power prediction. Roughness is another important factor in full-scale simulation because it has up to approximately 7% effect on the delivery power. As a result of validation study, the numerical simulations of full-scale ship self-propulsion shows good agreement with the sea trail data especially for cases that have considered both roughness and free surface effects. This result will largely enhance our confidence to apply full-scale simulation in the prediction of ship’s self-propulsion performance in the future ship designs.

Estimation of full-scale performance of energy-saving devices using Boundary Layer Similarity model

The design and energy saving effect prediction of rudder-bulb-fin device based on CFD and model test

Numerical Analysis of Full-scale Ship Self-Propulsion Performance with direct Comparison to Statistical Sea Trail Results

A Combined Method of CFD Simulation and Modified Beddoes-Leishman Model to Predict the Dynamic Stall Characterizations of S809 Airfoil

Research on Course-Changing Performance of a Large Ship with Spoiler Fins

Ship-scale CFD benchmark study of a pre-swirl duct on KVLCC2

A Practical Method for Predicting the Propulsive Performance of Energy Efficient Ship with Wave Devouring Hydrofoils at Actual Seas

Influence of scale effect on flow field offset for ships in confined waters

Research on self-propulsion simulation of a polar ship in a brash ice channel based on body force model

An Improved BEMT Model Based on Agent Actuating Disk with Application to Ship Self-Propulsion Simulation

Experimental and Numerical Resistance Analysis for a Cruise Ship W/O Fin Stabilizers

Dynamics of stabilizer fins on the waterjet-propelled ship

Uncertainty suppression methods for CFD/EFD resistance prediction of ship model

Simulation strategy of the full-scale ship resistance and propulsion performance

Computational fluid dynamics (CFD) prediction of bank effects including verification and validation

Numerical simulation of KVLCC2 self-propulsion with ducted propeller in head waves

Planing Hull Hydrodynamic Performance Prediction Using LincoSim Virtual Towing Tank

Local flow assessment of the Japan Bulk Carrier using different turbulence models

Computational Analysis of the Effect of Hull Vane on Hydrodynamic Performance of a Medium-speed Vessel

Predicting the Performance of a Floating Wind Energy Converter in a Realistic Sea

Efficient Spectral Coupled Boundary Element Method for Fully Nonlinear Wave-Structure Interaction Simulation