Abstract:Accurate prediction of the self-propulsion performance is one of the most important factors for energy-efficient design of a ship. In general, the hydrodynamic performance of a full-scale ship could be achieved by model-scale simulation or towing tank test with extrapolations. With the development of CFD methods and computing power, directly predict ship performance with full-scale CFD is an important approach. In this article, a numerical study on the full-scale self-propulsion performance with propeller operating behind ship at model- and full-scale is presented. The study includes numerical simulations using RANS method with double-model and VOF model respectively and scale effect analysis based on overall performance, local flow fields and detailed vortex identification. Verification study on grid convergence is also performed for full-scale simulation with global and local mesh refinements. And a series of sea trail tests were performed to collect reliable data for the validation of CFD predictions. The analysis of scale effect on hull-propeller interaction shows that the difference on hull boundary layer and flow separation is the main source of scale effect on ship wake. And the results of the fluctuations of propeller thrust and torque along with circulation distribution and local flow field show that propeller’s loading is significantly higher for model-scale ship. It is suggested that the difference on vortex evolution and interaction is more pronounced and have larger effects on ship’s powering performance at model-scale than full-scale according to the simulation results. From the study on self-propulsion prediction, it could be concluded that the simplification on free surface treatment does not only affect the wave-making resistance for bare hull but also the propeller performance and propeller induced ship resistance which can produced up to 5% uncertainty to the power prediction. Roughness is another important factor in full-scale simulation because it has up to approximately 7% effect on the delivery power. As a result of validation study, the numerical simulations of full-scale ship self-propulsion shows good agreement with the sea trail data especially for cases that have considered both roughness and free surface effects. This result will largely enhance our confidence to apply full-scale simulation in the prediction of ship’s self-propulsion performance in the future ship designs.

The design and energy saving effect prediction of rudder-bulb-fin device based on CFD and model test

Boat Trial Validation and Resistance Prediction of a 36-Foot Hydrofoil Catamarans Using CFD

The design and energy saving effect of partial duct and unconventional pre-swirl fin and their combination system

Numerical Study of Hydrodynamic Performance of A High Maneuverability Ocean Engineering Ship with Pod Propeller Design

Numerical study of the hydrodynamic performances of surface piercing propeller

Hybrid Aerodynamic Optimization of a Propeller Based on the Reformulated Blade Element Momentum Theory

Effect of Propeller Face Camber Ratio on the Reduction of Fuel Consumption

Deep Learning Based Fast Prediction and Optimization of Aerodynamic Performance for a Propeller with Gurney Flap

Numerical Analysis of Full-scale Ship Self-Propulsion Performance with direct Comparison to Statistical Sea Trail Results

Ship Optimization Based on Fully-Parametric Models for Hull, Propeller and Rudder

RANSE simulations for unmanned sailboat performance prediction: Coupling aerodynamics and hydrodynamics in self-sailing

A Combined Method of CFD Simulation and Modified Beddoes-Leishman Model to Predict the Dynamic Stall Characterizations of S809 Airfoil

Numerical Analysis of the Hydrodynamic Performance Impact of Novel Appendage on Rim-driven Thruster

Assessments of propulsion models for free running surface ship turning circle simulations

Estimation of full-scale performance of energy-saving devices using Boundary Layer Similarity model

Numerical and Experimental Analysis of Lifting Forces of Fin Stabilizers with Fin–Hull Interaction

Numerical simulation of KVLCC2 self-propulsion with ducted propeller in head waves

Research on Course-Changing Performance of a Large Ship with Spoiler Fins

Computational fluid dynamics driven surrogate model to predict hydrodynamic and acoustic properties of propeller boss cap fins

Hydraulic performance prediction and optimization of an engine cooling water pump using computational fluid dynamic analysis

Comparative investigations on hull line optimization based on traditional and fully parametric methods for saving energy