Abstract:Accurate prediction of the self-propulsion performance is one of the most important factors for energy-efficient design of a ship. In general, the hydrodynamic performance of a full-scale ship could be achieved by model-scale simulation or towing tank test with extrapolations. With the development of CFD methods and computing power, directly predict ship performance with full-scale CFD is an important approach. In this article, a numerical study on the full-scale self-propulsion performance with propeller operating behind ship at model- and full-scale is presented. The study includes numerical simulations using RANS method with double-model and VOF model respectively and scale effect analysis based on overall performance, local flow fields and detailed vortex identification. Verification study on grid convergence is also performed for full-scale simulation with global and local mesh refinements. And a series of sea trail tests were performed to collect reliable data for the validation of CFD predictions. The analysis of scale effect on hull-propeller interaction shows that the difference on hull boundary layer and flow separation is the main source of scale effect on ship wake. And the results of the fluctuations of propeller thrust and torque along with circulation distribution and local flow field show that propeller’s loading is significantly higher for model-scale ship. It is suggested that the difference on vortex evolution and interaction is more pronounced and have larger effects on ship’s powering performance at model-scale than full-scale according to the simulation results. From the study on self-propulsion prediction, it could be concluded that the simplification on free surface treatment does not only affect the wave-making resistance for bare hull but also the propeller performance and propeller induced ship resistance which can produced up to 5% uncertainty to the power prediction. Roughness is another important factor in full-scale simulation because it has up to approximately 7% effect on the delivery power. As a result of validation study, the numerical simulations of full-scale ship self-propulsion shows good agreement with the sea trail data especially for cases that have considered both roughness and free surface effects. This result will largely enhance our confidence to apply full-scale simulation in the prediction of ship’s self-propulsion performance in the future ship designs.

Towards a full-scale CFD guideline for simulating a ship advancing in open water

Coupled Computational Fluid Dynamics-Discrete Element Method for Simulating the Interactions Between Ship-Induced Waves and Riprap on Restricted Waterway Banks

Numerical Analysis of Full-scale Ship Self-Propulsion Performance with direct Comparison to Statistical Sea Trail Results

CFD simulations of ship maneuvering motion

Uncertainty suppression methods for CFD/EFD resistance prediction of ship model

Computational fluid dynamics (CFD) prediction of bank effects including verification and validation

Simulation strategy of the full-scale ship resistance and propulsion performance

On the Validity of CFD for Simulating Extreme Green Water Loads on Ocean-Going Vessels

Application Progress of Computational Fluid Dynamic Techniques for Complex Viscous Flows in Ship and Ocean Engineering

CFD Simulations of Self-Propulsion and Turning Circle Maneuver Up to 90º of Ship in Waves

A method for ship resistance prediction based on CFD computation

Simulations of Self-Propelled Fully Appended Ship Model at Different Speeds

Calculations of the Ship Performances and Solving of RANS Equations in the 21st Century

Numerical Investigation on Steady Wave of High-Speed Ship with Transom Stern by Potential Flow and CFD Methods

Numerical Study of Viscous Wave-Making Resistance of Ship Navigation in Still Water

CFD-FEM simulation of hydroelastic responses and slamming loads of a bow-flare ship advancing in head regular waves

A review of the numerical strategies for solving ship hydroelasticity based on CFD-FEM technology

Full-scale CFD simulations for the determination of ship resistance as a rational, alternative method to towing tank experiments

CFD Investigations of Ship Maneuvering in Waves Using naoe-FOAM-SJTU Solver

Numerical Simulations of Viscous Flows Around Surface Ship by Level Set Method

Ship Optimization Design of the Resistance and Seakeeping Performance Based on CFD