Comparative Analysis of the Influence of Different Preparation Methods on the Properties of TEMPO-Oxidized Bacterial Cellulose Powder Films

Dieter Rahmadiawan,Shih-Chen Shi,Hairul Abral,Mohammad Khalid Ilham,Eni Sugiarti,Ahmad Novi Muslimin,R.A Ilyas,Remon Lapisa,Nandy Setiadi Djaya Putra
DOI: https://doi.org/10.1080/15440478.2023.2301386
2024-01-13
Journal of Natural Fibers
Abstract:The preparation method of cellulose films plays a vital role in their properties. This work aims to characterize 2, 2, 6, 6-tetramethylpiperidine-1-oxyl (TEMPO)-oxidized bacterial cellulose powder (TOBCP) films prepared with three different methods (casting, boiling-casting, and boiling-vacuum). It is found that film by casting (CT film) shows the best electrical properties. A light-emitting diode (LED) in a direct current circuit connected to the CT film glows the most brightly. However, this film had lower tensile strength and thermal stability than films from boiling and boiling-vacuum techniques. The boiling-vacuum film presents the most compact fiber structure and the highest tensile and thermal properties. This film also shows the lowest electrical properties and the dimmest LED light. These results demonstrate the TOBCP properties from different methods that can be used to prepare film with desirable properties. 纤维素薄膜的制备方法对其性能起着至关重要的作用. 本工作旨在表征采用三种不同方法(流延、沸腾流延和沸腾真空)制备的2,2,6,6-四甲基哌啶-1-氧基(TEMPO)氧化细菌纤维素粉末(TOBCP)薄膜. 研究发现,流延薄膜(CT薄膜)具有最佳的电学性能. 连接到CT胶片的直流电路中的发光二极管(LED)发光最亮. 然而,该膜的拉伸强度和热稳定性低于沸腾和沸腾真空技术的膜. 沸腾真空膜呈现出最紧凑的纤维结构和最高的拉伸和热性能. 该薄膜还显示出最低的电性能和最暗淡的LED光. 这些结果证明了不同方法的TOBCP性能,可用于制备具有所需性能的膜.
materials science, textiles
What problem does this paper attempt to address?
This paper mainly discussed the effect of different preparation methods on the properties of 2,2,6,6-tetramethylpiperidine-1-oxyl (TEMPO) oxidized bacterial cellulose powder (TOBCP) films. It was found that the CT film prepared by casting method had the best electrical performance and was suitable for LED circuits, but its tensile strength and thermal stability were relatively low. The film prepared by boiling vacuum method showed the highest tensile and thermal performance, although its electrical performance was lower. These results indicate that different preparation methods can be used to customize TOBCP films with specific properties. The paper also discussed the environmental impact and resource consumption of cellulose films, as well as how TEMPO oxidation treatment affects the conductivity of cellulose. The study is of great significance for understanding and optimizing the preparation process of bacterial cellulose films.