Abstract:Experimental techniques such as the cone calorimeter, representing realistic fire conditions, and the thermogravimetric analyser (TGA) combined with evolved gas analysis (EGA) can be used to determine flammability and degradation properties of materials. The desire is to correlate the flammability properties measured in the cone calorimeter for samples of size 100mm×100mm with those measured or deduced from TGA combined with EGA for milligram samples. Such an achievement will allow the design of fire-safe materials by quickly assessing (a) the fire safety of materials in their earliest milligram formulation and (b) the dependence of their flammability properties on the molecular structure of the material. In the present study, a cone calorimeter and TGA investigation is conducted for commercial Nordic Spruce wood impregnated by mono-ammonium phosphate (fire retardant, FR) through a vacuum pressure method. Experiments in the cone calorimeter with increasing FR concentrations indicated that (a) the char yields increased, (b) the apparent ignition temperature increased, (c) time to piloted ignition increased, (d) the total amount of heat released was reduced, (e) the peak heat release rate was reduced and (f) the carbon monoxide and smoke yields increased especially before ignition occurred. By comparison, char yields also increased with FR content in the TGA degradation experiments in nitrogen. The increase in the char yield with FR content explains quantitatively the decrease in the heat release in the cone calorimeter. By contrast, the onset temperatures measured in TGA decreased, whereas the ignition temperature deduced in the cone calorimeter increased with FR content. This difference is attributed to reduced yield of levoglucosan (reported in recent literature using TGA/EGA) with increased char yield as well as to the presence of phosphorous containing moieties in the volatiles, which both can quench piloted ignition. Finally, the TGA measurements showed that the FR concentrations decreased for milligram samples at different distances from the surface of the wood used in the cone calorimeter measurements. The variation of FR retardant with depth needs to be considered when using TGA data to interpret cone calorimeter measurements and the fire performance of the FR wood in approval tests such as the single burning item (SBI).

The Effect of Intumescent Coating Containing Expandable Graphite onto Spruce Wood

Effect of Expandable Graphite Flakes on the Flame Resistance of Oak Wood

Research on Fire Retardant Performance of Wood with the Compound of Potassium Carbonate and SiO2 Gels

Evaluating the Effectiveness of Cellulose-Based Surfactants in Expandable Graphite Wood Coatings

Montmorillonite-Synergized Water-Based Intumescent Flame Retardant Coating for Plywood

Fire-retardant and Smoke-Suppressant Performance of an Intumescent Waterborne Amino-Resin Fire-Retardant Coating for Wood

Flammability assessment of fire-retarded Nordic Spruce wood using thermogravimetric analyses and cone calorimetry

Effect of graphene on properties of acrylic emulsion intumescent fire retardant coating

Effect of fire-retardant treatment of wood prior to thermo-mechanical densification

Environmentally Friendly, High-Performance Fire Retardant Made from Cellulose and Graphite

Research on Thermal Stability and Flammability of Wood Scob-Based Loose-Fill Thermal Insulation Impregnated with Multicomponent Suspensions

Phosphorus–Nitrogen Interaction in Fire Retardants and Its Impact on the Chemistry of Treated Wood

Effect of a biomass based waterborne fire retardant coating on the flame retardancy for wood

Fire resistance of pine wood treated with phenol-formaldehyde resin and phosphate-based flame retardant

Combustion Behavior and Thermal Degradation Properties of Wood Impregnated with Intumescent Biomass Flame Retardants: Phytic Acid, Hydrolyzed Collagen, and Glycerol

The Effect of Expanded Vermiculite on the Fire Resistance of Waterborne Acrylic Coatings

Highly Flame-Retardant and Low Heat/Smoke-Release Wood Materials: Fabrication and Properties

Preparation and Study on Nitrogen- and Phosphorus- Containing Fire Resistant Coatings for Wood by UV-Cured Methods

Fixation of Tripotassium Citrate Flame Retardant Using a Sorbitol and Citric Acid Wood-Modification Treatment

Flame Protection Technologies for Wood: Developing and Testing for Fire of Timbers with a Flame-retardant Coating Based on the Epoxy-amine Composite Modified by Copper(II) Hexafluorosilicate

Water Permeability and Adhesion Strength of Bio-based Coating Applied on Wood