Abstract:The aerodynamic performance characteristics of an unmanned aerial vehicle airfoil and wing are optimized in the low Reynolds number regime using a variable-fidelity Multi-Level Hierarchical Kriging (MHK) surrogate modeling framework. This methodology employs aerodynamic data obtained from computational grids of varying grid resolution. This approach results in an efficient framework for optimizing expensive aerodynamic functions with the aid of lower fidelity data. The MHK-based optimization framework is first applied to enhance the aerodynamic properties of an Eppler E214 airfoil. The endurance factor of the airfoil is improved by 28%. Next, the aerodynamic characteristics of a small unmanned aerial vehicle wing is optimized. The endurance factor of the optimal wing is improved by 12.5%, with a substantial 45 drag count reduction. The optimal wing is of a swept wing design with a leading edge sweep of 13.6°. The evolution of a swept wing as the optimal wing design is an interesting outcome of the present study. Though the effect of wing sweep is well studied in high-subsonic and supersonic flows, its effect in the incompressible low Reynolds number regime is quantified in the present study. The wing sweep increases the suction on the outboard portion of the wing leading to a higher lift coefficient of the optimal wing. Further, the drag coefficient of the optimal wing is also reduced compared to the baseline wing. Much of this drag reduction comes from the reduction in the pressure drag component. Thus the wing sweep not only increases the lift coefficient, but also decreases the drag coefficient. This leads to a significant increase in the lift-to-drag ratio and the endurance factor of the optimal wing design. The present results demonstrate the optimization efficiency of the MHK modeling approach in the sensitive low Reynolds number regime.

Wing Efficiency Enhancement at Low Reynolds Number

Enhancing Lift and Reducing Wingtip Vortices Using a Passive Rotor on Finite-Span Wings

The effect of Reynolds number on the separated flow over a low-aspect-ratio wing

Aerodynamic Design of Multi-Propeller/wing Integration at Low Reynolds Numbers

Numerical study of the aerodynamic effects of bio-inspired leading-edge serrations on a heaving wing at a low Reynolds number

Aerodynamic performance of semi-wing with multiple winglets operating at low- and medium-range Reynolds numbers

Aerodynamic Optimization Design of Low Reynolds Number Aerofoils Based on Induced Laminar Separation

Effect of the Wing Morphology and Structural Form on the Flexible Hovering Flapping Wing

Aerodynamic Interference and Reynolds Number Effects of Low-Speed Close-Coupled Biplanes

Bioinspired wingtip devices: a pathway to improve aerodynamic performance during low Reynolds number flight

The Footprint of Laminar Separation on a Wall-Bounded Wing Section at Transitional Reynolds Numbers

Effect of Trailing Edge and Span Morphing on the Performance of an Optimized NACA6409 Wing in Ground Effect

Suction Control of Flow Separation of a Low-Aspect-ratio Wing at a Low Reynolds Number

Large Aerodynamic Forces on A Sweeping Wing at Low Reynolds Number

Aerodynamic shape optimization at low Reynolds number using multi-level hierarchical Kriging models

Aerodynamic efficiency of a bioinspired flapping wing rotor at low Reynolds number

Boundary-layer Transition of Advanced Fighter Wings at High-Speed Cruise Conditions

The Role of Effective Angle of Attack in Hovering Pitching-Flapping-perturbed Revolving Wings at Low Reynolds Number

Attenuation of Boundary-Layer Instabilities for Natural Laminar Flow Design on Supersonic Highly Swept Wings

A Novel Basic Conceptual Design and Analysis of a Morphing Wing Using Re-Entrant Hexagonal Cellular Structure

Design and Aerodynamic Characteristics of a Span Morphing Wing