Drag Reduction on the Basis of the Area Rule of the Small-Scale Supersonic Flight Experiment Vehicle Being Developed at Muroran Institute of Technology (Second Report)

Kazuhide Mizobata,Taichi Mio,Katsuya Miyamoto

DOI: https://doi.org/10.3390/aerospace11090777

IF: 2.66

2024-09-21

Aerospace

Abstract:A small-scale supersonic flight experiment vehicle named OWASHI is being developed at Muroran Institute of Technology as a flying testbed for verification of innovative technologies for high-speed atmospheric flights. Drag reduction in the transonic and supersonic regimes is quite crucial for attainability of its supersonic flights. This study aims to obtain configuration modification for transonic drag reduction on the basis of the so-called area rule. In order to prevent accumulation of compression waves, various profiles of the bottleneck and the bulge are designed by using arcs with constant and large radii and spline curves approximating them. Their effects are assessed through CFD analysis, wind tunnel tests, and wave drag analysis. As a result, an area-rule-based configuration with a sharpened conical nose and a large-radius bottleneck achieves significant drag reduction in a transonic Mach range, as well as 57-count (57 × 10−4) reduction at the design Mach number of 1.1. However, the drag reduction effects of bulges are small and apparent only in a narrow Mach range. On the other hand, in the practical vehicle configuration, rearward fuselage extension shows a large amount of drag reduction, whereas the addition of an intake cancels the drag reduction effects of area-rule-based configurations.

engineering, aerospace