Abstract:Twin-screw granulation is a promising wet granulation technique for the continuous manufacturing of pharmaceutical solid dosage forms. A twin screw granulator displays a short residence time. Thus, the solid-liquid mixing must be achieved quickly by appropriate arrangement of transport and kneading elements in the granulator screw allowing the production of granules with a size distribution appropriate for tableting. The distribution of residence time and granulation liquid is governed by the field conditions (such as location and length of mixing zones) in the twin-screw granulator, thus contain interesting information on granulation time, mixing and resulting sub-processes such as wetting, aggregation and breakage. In this study, the impact of process (feed rate, screw speed and liquid-to-solid ratio) and equipment parameters (number of kneading discs and stagger angle) on the residence time (distribution), the granulation liquid-powder mixing and the resulting granule size distributions during twin-screw granulation were investigated. Residence time and axial mixing data was extracted from tracer maps and the solid-liquid mixing was quantified from moisture maps, obtained by monitoring the granules at the granulator outlet using near infra-red chemical imaging (NIR-CI). The granule size distribution was measured using the sieving method. An increasing screw speed dominantly reduced the mean residence time. Interaction of material throughput with the screw speed and with the number of kneading discs led to most variation in the studied responses including residence time and mixing capacity. At a high screw speed, granulation yield improved due to high axial mixing. However, increasing material throughput quickly lowers the yield due to insufficient mixing of liquid and powder. Moreover, increasing liquid-to-solid ratio resulted in more oversized granules, and the fraction of oversized granules further increased at higher throughput. Although an increasing number of kneading discs was found to be critical for achieving a uniform distribution of the granulation liquid, the granulation performance was hampered due to insufficient solid-liquid mixing capacity of the current kneading discs which is essential for wet granulation. Thus, a balance between material throughput and screw speed should be strived for in order to achieve a specific granulation time and solid-liquid mixing for high granulation yield. Additionally, more efforts are needed both in modification of the screw configuration as well as the geometry of the mixing elements to improve the mixing capacity of the twin-screw granulator. The results from the current experimental study improved the understanding regarding the interplay between granulation time and the axial and solid-liquid mixing responsible for the granulation performance in twin-screw wet granulation.

An Understanding of the Relationship Between Mixing Performance and Power Consumption in a High-Shear Wet Granulation Pre-mixing

Nanoparticle Deagglomeration Driven by a High Shear Mixer and Intensification of Low-Speed Stirring in a Viscous System

Investigation of mixing homogeneity of binary particle systems in high-shear wet granulator by DEM

Numerical Simulation of Hydrodynamics and Mixing Characteristics of High-Viscosity Non-Newtonian Fluid in Twin-Shaft Kneaders

Performance Evaluation and Scale-Up Behavior of an Engineered In-Line Mixer for 3D Printing

Analysis of End-Point with Power Consumption in High Speed Mixer

Using a material database and data fusion method to accelerate the process model development of high shear wet granulation

Numerical Simulation of Particle Mixing Behavior in High Speed Shear Mixer and Cylinder Mixer

Understanding of Wetting Mechanism Toward the Sticky Powder and Machine Learning in Predicting Granule Size Distribution Under High Shear Wet Granulation

Elucidation of the Molecular Mechanism of Wet Granulation for Pharmaceutical Standard Formulations in a High-Speed Shear Mixer Using Near-Infrared Spectroscopy

Experimental investigation of heat generation during the mixing of granular materials using an overhead stirrer

Mechanistic understanding of the effects of process and design parameters on the mixing dynamics in continuous twin-screw granulation

Study on Preparation of Shengmaiyin of Traditional Chinese Medicine Granules Using Freeze-Drying and High Shear Mixing Technique

Linking granulation performance with residence time and granulation liquid distributions in twin-screw granulation: An experimental investigation

Numerical investigation of mixing and heat transfer of granular material in a ribbon reactor: effect of impeller speed and filling rate

Pre-nucleation in high-shear wet granulation

Application of Near-Infrared Spectroscopy Combined with Design of Experiments for Process Development of the Pulsed Spray Fluid Bed Granulation Process

Application of Definitive Screening Design to Quantify the Effects of Process Parameters on Key Granule Characteristics and Optimize Operating Parameters in Pulsed-Spray Fluid-Bed Granulation

An Experimentally Validated Coarse-Grain DEM Study of Monodisperse Granular Mixing

Investigating the Effects of Mixing Dynamics on Twin-Screw Granule Quality Attributes via the Development of a Physics-Based Process Map