Abstract:This paper establishes a transient equivalent circuit of cross‐line same‐phase successive grounding faults, and analyses the characteristics of zero‐sequence current. Then, a fault initiation criterion based on kurtosis theory and the Teager‐Kaiser energy operator (TKEO) is proposed. Finally, a method for faulty line detection based on cross‐correlation distance and transient energy is proposed and different fault conditions verify the effectiveness of proposed method. Currently, theoretical analysis of single‐phase grounding (SPG) faults in low‐current grounding systems has reached a high level of refinement, and the corresponding detection methods have matured. However, there is a significant lack of research on successive grounding (SG) faults, particularly in the area of detecting cross‐line same‐phase successive grounding (CSSG) faults in arc suppression coil grounding systems. To address these issues, a novel faulty line detection method based on transient characteristics of CSSG is proposed. Firstly, a transient equivalent circuit is established, and the characteristics of transient zero‐sequence current (ZSC) are theoretically analysed. Secondly, variational mode decomposition (VMD) is employed to extract low and high‐frequency information from intrinsic mode functions (IMFs). Subsequently, a fault initiation criterion based on kurtosis theory and the Teager‐Kaiser energy operator (TKEO) is proposed, which can accurately detect the occurrence time of secondary faults. Finally, a method for faulty line detection based on cross‐correlation distance (CCD) and transient energy (TE) is proposed. The results of PSCAD simulation under different conditions and field test affirm the accuracy of the analysis and the effectiveness of the proposed method.

Study on the Mechanism and Electrical Characterization of the Tree-contact Incipient Fault in the Non-effectively Grounded System

Comprehensive study on tree‐contact single‐phase‐to‐ground faults: Modelling, risk analysis, and detection recommendations

The Electrical Trees Initiation at Different Electric Field Strength in XLPE Cable Insulation

Study on arc characteristics and combustion feature of tree-wire discharge fault in distribution line

Faulty line detection for cross‐line same‐phase successive ground faults in distribution network based on transient characteristics

Diagnostic System for Current-Carrying Fault: Modeling, Precaution, and Prediction

A novel online monitoring method of ground fault in tree form distribution networks based on power line carrier devices

Investigation on test schemes for grounding grids corrosion diagnosis

Single‐phase Grouding Fault Analysis and Control Scheme of Transformerless Flexible Multistate Switch

Incipient Fault Detection and Condition Assessment in DFIGs Based on External Leakage Flux Sensing and Modified Multiscale Poincare Plots Analysis

Method Of Branch Fault Identification On Tree Type Transmission Network

Analysis of Short-Circuit Current Characteristics and Its Distribution of Artificial Grounding Faults on DC Transmission Lines

A faulty line detection method for single phase-to-ground fault in resonant grounding system with CTs reversely connected

A Method of Single Phase to Ground Fault Feeder Selection Based on Single Phase Current Traveling Wave for Distribution Lines

Root-Cause Identification of Single Line-to-Ground Fault in Urban Small Current Grounding Systems Based on Correlation Dimension and Average Resistance

Electrical Treeing: A Phase-Field Model

Numerical Modeling, Electrical Characteristics Analysis and Experimental Validation of Severe Inter-Turn Short Circuit Fault Conditions on Stator Winding in DFIG of Wind Turbines

The Impact of Cross Line Different-Phase Successive Faults on Fault Detection Devices

Fault Model and Travelling Wave Matching Based Single Terminal Fault Location Algorithm for T-Connection Transmission Line: A Yunnan Power Grid Study

A Fault Current Limiting Control Scheme for Sectionalized Connection Mode Based on Dynamic Topology Adjustment

Study on the Characteristics of Turn-to-Turn Short Circuit Faults in the Primary Windings of the Generator Terminal Voltage Transformer