Abstract:Purpose Two corrosion inhibitors for closed cooling water systems, nitrite-based and mixture of nitrite and molybdate corrosion inhibitor, are often compared to each other. This study aims to optimize these two inhibitors in terms of concentration and pH for carbon steel protection, with insights into the double layer structure on surface and its impact on corrosion inhibition. Design/methodology/approach Electrochemical analysis including electrochemical impedance spectroscopy and potentiodynamic test are carried out for quick assessment of corrosion inhibition efficiency and optimization, which is confirmed by immersion test and microscopic analysis. The electronic properties of the surface film are analyzed through Mott–Schottky method which provides new insights into the inhibition mechanism and the role of each component in mixture inhibitor. Findings Mixture of nitrite and molybdate is shown to present higher inhibition efficiency, owning to the double layer structure. Nitrite alone can form a protective surface film, whereas molybdate leads to an n-type semiconductive film with lower donor density, hence giving rise to a better inhibition effect. Research limitations/implications Surface after inhibitor treatment has been carefully characterized to the microscopic scale, implying the effect of micro-structure, chemical composition and electronic properties on the corrosion resistance. Inorganic corrosion inhibitors can be tuned to provide higher efficiency by careful design of surface film structure and composition. Originality/value Almost every study on corrosion inhibitor applies such method for quick assessment of corrosion inhibition effect. Mott–Schottky test is one of electrochemical methods that reveals the electronic properties of the surface film. Previous works have studied the surface layer mainly through X-ray photoelectron spectroscopy. This study provides another insight into the surface film treated by nitrite and molybdate through Mott–Schottky analysis, and relates this structure to the corrosion inhibition effect based on multiple analysis including electrochemistry, microscopic characterization, thermodynamics and interface chemistry.

Inhibition mechanism of air nanobubbles on brass corrosion in circulating cooling water systems

Particle Properties of Air Nanobubbles and Their Inhibition Mechanism on Brass Corrosion in Recirculating Cooling Water: Effects of Concentration Ratio and Flow Velocity

Comparison of the Corrosion Behavior of Brass in TiO2 and Al2O3 Nanofluids

Corrosion behavior of brass in SCW-SDBS-TiO2 nanofluid

Effects of TiO₂ Nanofluid on the Surface State of Brass

Synergistic effect of water solubility sulfhydryl compound and rare-earth ions on the microstructure, composition, and corrosion resistance of brass

Electrochemical Studies of Polyaspartic Acid and Sodium Tungstate As Corrosion Inhibitors for Brass and Cu30Ni Alloy in Simulated Cooled Water Solutions

Microbiological Induced Corrosion on Brass in Recycling Cooling Water System Makeup by Reclaimed Water

Nanofluid-infused slippery surface: Bioinspired coating on Zn with high corrosion inhibition performance

Mitigation of biofouling in agricultural water distribution systems with nanobubbles

Synergetic Effect of Corrosion and Ultrasonic Cavitation Erosion on Leaded Brass

Seawater corrosion resistance of a novel Cu-Ni/γ-Al2O3&CeO2 composite coating on H64 brass

The Effect of Complexing Agent on Electroless Nickel Sulphamate Coating on Brass Alloy: Structure Characteristics & Corrosion Behavior

Antibacterial and anticorrosive properties of CuZnO@RGO waterborne polyurethane coating in circulating cooling water

Optimization and understanding of corrosion inhibitors for cooling water system

Bioengineered silver nanoparticles as potent anti-corrosive inhibitor for mild steel in cooling towers

Direct Growth of Hexagonal Boron Nitride Nanofilms on Stainless Steel for Corrosion Protection

The Complex of PASP and Tungstate As Inhibitors of Cupronickel B10′s Corrosion in 3% NaCl Solution

Computational, theoretical and experimental studies of four amino acids as corrosion inhibitors for brass in 3% NaCl medium

Factors and mechanisms influencing the composition and structure: anodization of brass (Cu0.64Zn0.36) alloy in alkaline solutions

Beta-cyclodextrin-zinc acetylacetonate (β-CD@ZnA) inclusion complex formation as a sustainable/smart nanocarrier of corrosion inhibitors for a water-based siliconized composite film: Integrated experimental analysis and fundamental computational electronic/atomic-scale simulation