Abstract:To fabricate an industrial and highly efficient super-hydrophobic brass surface, annealed H59 brass samples have here been textured by using a 1064 nm wavelength nanosecond fiber laser. The effects of different laser parameters (such as laser fluence, scanning speed, and repetition frequency), on the translation to super-hydrophobic surfaces, have been of special interest to study. As a result of these studies, hydrophobic properties, with larger water contact angles (WCA), were observed to appear faster than for samples that had not been heat-treated (after an evolution time of 4 days). This wettability transition, as well as the evolution of surface texture and nanograins, were caused by thermal annealing treatments, in combination with laser texturing. At first, the H59 brass samples were annealed in a Muffle furnace at temperatures of 350 °C, 600 °C, and 800 °C. As a result of these treatments, there were rapid formations of coarse surface morphologies, containing particles of both micro/nano-level dimensions, as well as enlarged distances between the laser-induced grooves. A large number of nanograins were formed on the brass metal surfaces, onto which an increased number of exceedingly small nanoparticles were attached. This combination of fine nanoparticles, with a scattered distribution of nanograins, created a hierarchic Lotus leaf-like morphology containing both micro-and nanostructured material (i.e., micro/nanostructured material). Furthermore, the distances between the nano-clusters and the size of nano-grains were observed, analyzed, and strongly coupled to the wettability transition time. Hence, the formation and evolution of functional groups on the brass surfaces were influenced by the micro/nanostructure formations on the surfaces. As a direct consequence, the surface energies became reduced, which affected the speed of the wettability transition-which became enhanced. The micro/nanostructures on the H59 brass surfaces were analyzed by using Field Emission Scanning Electron Microscopy (FESEM). The chemical compositions of these surfaces were characterized by using an Energy Dispersive Analysis System (EDS). In addition to the wettability, the surface energy was thereby analyzed with respect to the different surface micro/nanostructures as well as to the roughness characteristics. This study has provided a facile method (with an experimental proof thereof) by which it is possible to construct textured H59 brass surfaces with tunable wetting behaviors. It is also expected that these results will effectively extend the industrial applications of brass material.

Synergistic effect of water solubility sulfhydryl compound and rare-earth ions on the microstructure, composition, and corrosion resistance of brass

Effects of TiO₂ Nanofluid on the Surface State of Brass

Corrosion behavior of brass in SCW-SDBS-TiO2 nanofluid

Comparison of the Corrosion Behavior of Brass in TiO2 and Al2O3 Nanofluids

An antitarnish film on brass

Superhydrophobic Nanocontainers for Passive and Active Corrosion Protection

Investigation of Microstructure and Corrosion Behavior of Weathering Steel in Aqueous Solution Containing Different Anions for Simulating Service Environments

SYNERGISTIC EFFECT OF CORROSION INHIBITION ON BRONZE BY BENZOTRIAZOLE AND SODIUM MOLYBDATE

Synergetic Effect of Corrosion and Ultrasonic Cavitation Erosion on Leaded Brass

Seawater corrosion resistance of a novel Cu-Ni/γ-Al2O3&CeO2 composite coating on H64 brass

Electrochemical Studies of Polyaspartic Acid and Sodium Tungstate As Corrosion Inhibitors for Brass and Cu30Ni Alloy in Simulated Cooled Water Solutions

Particle Properties of Air Nanobubbles and Their Inhibition Mechanism on Brass Corrosion in Recirculating Cooling Water: Effects of Concentration Ratio and Flow Velocity

Evolution of a Superhydrophobic H59 Brass Surface by Using Laser Texturing via Post Thermal Annealing

Synergistically and sustainably performed inhibitors for galvanised steel against aqueous corrosion

Wettability transition of laser textured brass surfaces inside different mediums

Improvement of Adhesion Properties and Corrosion Resistance of Sol-Gel Coating on Zinc

Optimization of Zn-Cr proportions for hybrid multilayer electroplating of AISI 1045 steel – towards super-hydrophobicity and anti-corrosive nature

Synergistic inhibition of benzotriazole and sodium D-gluconate on steel corrosion in simulated concrete pore solution

Corrosion Resistance Behavior of Zinc Substrate Treated with Rare Earth Salt Passivation

Fabrication of cerium myristate coating for a mechanochemically robust modifier-free superwettability system to enhance the corrosion resistance on 316L steel by one-step electrodeposition

Preparation of superhydrophobic coating with anti-corrosion and anti-fouling properties on the surface of low manganese steel by electrodeposition