Abstract:Comprehensive Summary Recently, hybrid organic–inorganic perovskite materials have drawn widespread attention because of their outstanding optoelectrical properties (i.e., high absorption coefficient, long carrier diffusion distance), hence they are suitable light‐absorbing materials for photovoltaic application. Among all perovskite materials, formamidinium lead iodide (FAPbI3) based solar cells exhibit impressive power conversion efficiency (PCE) at laboratory stage, showing great potential to compete with silicon‐based solar cell. However, FAPbI3 still suffers from poor phase stability which is the prior problem that needs to be addressed before its further commercialization. To be precise, the photoactive phase (α phase) is thermodynamically metastable at room temperature, which not only makes α phase tend to transform into photoinactive phase (δ phase), but also causes competitive crystallization between two phases during the film preparation process, making it hard to fabricate pure α‐FAPbI3 films. In our review, we summarized key factors that are vital for obtaining high‐quality FAPbI3 perovskite thin films and enhancing the stability of FAPbI3 photoactive phase. First of all, precursor solution stability is of great importance since the conditions of precursor solution determine the nucleation and crystal growth process of perovskite. By introducing coordinating additives, using FAPbI3 single crystal as raw material or applying co‐solution strategy, the impurities formed by side reaction during precursor solution aging can be effectively suppressed, thus the stability of FAPbI3 solution can be greatly prolonged. Second, the crystallization kinetics of FAPbI3 have been systematically manipulated to obtain dense and large grain size perovskite films. Through introducing intermediate phase, regulating the surface energy, and retarding the crystal growth of FAPbI3 in crystallization process, not only films without pinholes and fewer grain boundaries can be obtained, the pre‐formed δ phase at room temperature can also be well‐suppressed, thus high‐quality α‐FAPbI3 films can be obtained. Third, how to thermodynamically enhance the phase stability of acquired FAPbI3 film has been extensively studied. The Gibbs free energy of FAPbI3 photoactive phase can be reduced through composition engineering, dimension engineering and external additives engineering, hence the phase transition barrier from α phase to δ phase has been significantly improved, which further enhance the phase stability of α‐ FAPbI3. Lastly, we pointed out challenges of each method and proposed potential applications of mentioned strategies on improving the stability of all kinds of perovskite materials, thus further boost the commercialization of perovskite solar cell devices. This article is protected by copyright. All rights reserved.

Fabrication of [001]‐Oriented FAPbI3‐Based Photodetector With Excellent Air Stability Via Green Anti‐Solvent Additive Engineering

N‐(2‐aminoethyl) Acetamide Additive Enables Phase‐Pure and Stable α‐FAPbI3 for Efficient Self‐Powered Photodetectors

Phase‐Transition‐Cycle‐Induced Recrystallization of FAPbI3 Film in An Open Environment Toward Excellent Photodetectors with High Reproducibility

Stabilizing Formamidinium Lead Iodide Perovskite by Sulfonyl‐Functionalized Phenethylammonium Salt Via Crystallization Control and Surface Passivation

Ethylamine Iodide Additive Enables Solid‐to‐Solid Transformed Highly Oriented Perovskite for Excellent Photodetectors

Additive‐Free, Low‐Temperature Crystallization of Stable α‐FAPbI 3 Perovskite

Optoelectronic Properties of Polyvinylidene Fluoride Films Embedded with FAPbBr3 Nanocrystals Affected by Carrier Kinetics

Oriented Nucleation in Formamidinium Perovskite for Photovoltaics

Advances to Stabilize Photoactive Phase of FAPbI3 Perovskite

Stable α‐FAPbI3 via porous PbI2 for efficient perovskite solar cells

Spontaneous Low-Temperature Crystallization of Α-Fapbi3 for Highly Efficient Perovskite Solar Cells

Stabilization of Highly Efficient and Stable Phase‐Pure FAPbI3 Perovskite Solar Cells by Molecularly Tailored 2D‐overlayers

Complex Additive‐Assisted Crystal Growth and Phase Stabilization of α‐FAPbI3 Film for Highly Efficient, Air‐Stable Perovskite Photovoltaics

High‐Quality α‐FAPbI 3 Film Assisted by Lead Acetate for Efficient Solar Cells

Stable α/δ phase junction of formamidinium lead iodide perovskites for enhanced near-infrared emission.

Mixed Cation FAxPEA1–xPbI3 with Enhanced Phase and Ambient Stability toward High‐Performance Perovskite Solar Cells

Lead‐Chelating Intermediate for Air‐Processed Phase‐Pure FAPbI3 Perovskite Solar Cells

Significantly Improved Black Phase Stability of FAPbI3 Nanowires Via Spatially Confined Vapor Phase Growth in Nanoporous Templates.

Phase‐pure Α‐Fapbi3 Perovskite Solar Cells via Activating Lead‐Iodine Frameworks

Perovskite Single Crystals and Thin Films for Optoelectronic Devices (conference Presentation)

Solution-Grown Formamidinium Hybrid Perovskite (fapbbr3) Single Crystals for Α-Particle and Γ-Ray Detection at Room Temperature