Abstract:Despite significant advancements in the field of mid-infrared lasers, the fluorescence around the 2–4 μm wavelength range remains a pressing concern. Ho 3+ /Er 3+ co-doped TeO 2 –ZnO–Nb 2 O 5 –PbO (TZNP) glasses were fabricated by conventional melt-quenching technique, and we also characterized their excellent mid-infrared (MIR) fluorescence properties. According to the observed parameter ΔT (144–141 °C) > 120 °C from differential scanning calorimeter (DSC) curves, the manufactured tellurite glass specimens displayed enhanced thermal stability and crystallization resistance. X-ray diffractometer (XRD) images demonstrated the non-crystalline structure of the produced specimens. Ho 3+ /Er 3+ co-doped tellurite glass specimens achieved emission enhancements of 2.0 μm and 4.1 μm through energy absorption of 980 nm LD, which could be assigned to the Ho 3+ : 5 I 7 → 5 I 8 and Ho 3+ : 5 F 5 → 5 I 4 radiation transition processes respectively. Meanwhile, intense 3.1 μm fluorescence was observed, which could be attributed to the transition of Er 3+ : 4 S 3/2 → 4 F 9/2 . We investigated the fluorescence properties of the produced glasses in detail, and the processes of energy transferring between Ho 3+ /Er 3+ were discussed on the basis of the quenching and increasing emission intensity at different dopant proportions of Er 3+ ions. Additionally, the optimized 1 mol% Ho 3+ and 1.5 mol% Er 3+ co-doped TZNP glass possessed the strongest emission intensity, and the fluorescence lifetime values of this sample were calculated to be 1.81 ms and 1.38 ms at 2.0 μm and 4.1 μm, respectively. The gain coefficients demonstrated that only small pump energy can achieve the MIR laser gains. These above findings suggest that the prepared samples are potentially competitive and efficient as an innovative glass in the MIR laser design and optical amplifiers applications.

Dual-wavelength lasing at ∼1.2 μm and ∼2.0 μm in a Ho3+-doped fluoroaluminate glass microsphere

Low-Threshold Microlaser in Er : Yb Phosphate Glass Coated Microsphere

High-Q, Low-Mode-volume Microsphere-Integrated Fabry–Perot Cavity for Optofluidic Lasing Applications

Femtosecond Laser Direct Writing of High-Q Microresonators in Glass and Crystals

Efficient 2075-nm laser emission from Ho3+-doped fluorotellurite glass in a compact all-fiber structure

Wavelength extension beyond 3 μm in Ho3+/Pr3+ co-doped AlF3-based fiber laser

Fiber-coupled microsphere laser

Observation of Microlaser with Er-doped Phosphate Glass Coated Microsphere Pumped by 780 Nm

Bismuth Silicate Glass: A New Choice for 2μm Fiber Lasers

Femtosecond Mode-locked Fiber Laser at 1 Μm Via Optical Microfiber Dispersion Management

Microlaser based on a hybrid structure of a semiconductor nanowire and a silica microdisk cavity.

High-efficiency longwave 2085 nm laser output in low-loss Ho 3+ -doped fluorotellurite glass fiber by 1976 nm in-band pumping

High-Q lasing in Nd3+-doped phosphate glass microsphere resonators

Tm/Al Co-Doped Silica Glass Prepared by Laser Additive Manufacturing Technology for 2-Μm Photonic Crystal Fiber Laser

Demonstration of Yb3+-doped and Er3+/Yb3+-codoped On-Chip Microsphere Lasers

High-Q lasing in Nd^3+-doped phosphate glass microsphere resonators

Simultaneous ultraviolet, visible and near-infrared continuous-wave lasing in a rare-earth-doped microcavity

Bismuth-doped glass microsphere lasers

Improving 2–4 μm mid-infrared fluorescence properties of Ho 3+ via Er 3+ energy transfer in tellurite glasses

Spectral characterization and laser operation of Ho:SrF2 single-crystal fiber

High-power Lasing at 900 Nm in Nd3+-doped Fiber: a Direct Coordination Engineering Approach to Enhance Fluorescence