Abstract:The present study reports a simple, template free and controllable one-step synthesis of a series of amorphous, crystalline, and triphasic TiO 2 nanoparticles utilizing titanium( IV ) ethoxide as a molecular precursor. By reacting the titanium ethoxide in a mixture of ethanol, acetic acid, and water at reflux temperatures while varying the ratios of the reaction components, it was possible to obtain TiO 2 nanoparticles possessing high surface areas and pore volumes as well as diverse crystalline structures. The synthesized nanoparticles were characterized by FT-IR, XRD, SEM, TEM, TG, DTA, DTG, DRS, and argon sorption. X-ray diffraction and sorption analyses conclusively show that using an excess of ethanol resulted in the formation of an amorphous TiO 2 with a high surface area. Furthermore, an increase in the water content while slightly reducing the amount of acid but keeping ethanol still at excess resulted in the formation of a crystalline anatase phase, whereas the reaction in the absence of ethanol led to the formation of a triphasic material consisting of anatase (40.5%), rutile (25.5%), and brookite (34%). Under the optimized conditions, it was possible to produce amorphous and crystalline porous titanium dioxide with high surface areas of 350 and 310 m 2 g −1 respectively at low temperatures without subsequent heat treatment, which is reflected in their catalytic properties. Investigation of the photocatalytic and catalytic abilities of the synthesized nanoparticles to degrade and to reduce methylene blue (MB), respectively, as well as reduction of nitroaromatic compounds in aqueous media revealed that the amorphous materials showed the best performance with degradation of up to 94–99% of MB within 10 minutes. The kinetic studies also revealed that all nanoparticles exhibited high catalytic activity for the reduction of MB within a short time (3–4 min) and showed good agreement with a pseudo-first-order reaction model. The derived rate constants for the catalytic reduction of 2-NP, 3-NP, 4-NP, 2-NA, and 3-NA (NP = nitrophenol and NA = nitroaniline) with amorphous TiO 2 nanoparticles ( Ti-9 ), as the best catalyst, are 0.67 min −1 , 0.24 min −1 , 1.46 min −1 , 0.56 min −1 , and 0.21 min −1 , respectively. From the data, we can deduce that a high specific surface area, the occurrence of defects as well as the crystallinity of the materials play an essential role in the photocatalytic and catalytic performance.

Development of an automated and cost-effective apparatus for sol-gel solution deposition using spray coating technique and its application for TiO 2 -based photocatalytic films

Eco-Friendly Colloidal Aqueous Sol-Gel Process for TiO2 Synthesis: The Peptization Method to Obtain Crystalline and Photoactive Materials at Low Temperature

Photocatalytic TiO2 thin films and coatings prepared by sol–gel processing: a brief review

Photocatalytic degradation of acetaminophen from water solutions via thin films part I: preparation, characteriation, and analysis of titanium dioxide thin films

Spin Coating Immobilisation of C-N-TiO2 Co-Doped Nano Catalyst on Glass and Application for Photocatalysis or as Electron Transporting Layer for Perovskite Solar Cells

Mechanochemical Synthesis of TiO2 Nanoparticles and Their Self-organization at Interfaces to Produce Emulsion-Templated Photocatalytic Porous Polymers

Novel modified nonalkoxide sol–gel synthesis of multiphase high surface area TiO2 aerogels for photocatalysis

Photocatalytic Performance of Sol-Gel Prepared TiO2 Thin Films Annealed at Various Temperatures

Synthesis and characterization of mesoporous TiO2 nanostructured films prepared by a modified sol–gel method for application in dye solar cells

Multifunctional applications of TiO2 thin films synthesized by sol–gel dip coating technique

Characterization and photocatalytic activity of different molar ratios of TiO2 thin films prepared by Sol-Gel process

Development of surface coating technology of TiO2 powder and improvement of photocatalytic activity by surface modification

Development of an automated SILAR method for the sustainable fabrication of BiOI/TiO2 photoanodes

Electrochemical synthesis of titanium dioxide nanostructures and its application in the in dye photocatalytic removal

Enhanced Photocatalytic Properties and Photoinduced Crystallization of TiO2-Fe2O3 Inverse Opals Fabricated by Atomic Layer Deposition

Synthesis and characterization of TiO2-based supported materials for industrial application and recovery in a pilot photocatalytic plant using chemometric approach

Hydrothermal/solvothermal synthesis and treatment of TiO2 for photocatalytic degradation of air pollutants: Preparation, characterization, properties, and performance

THE PREPARATION AND CHARACTERIZATION OF TiO2THIN FILM PHOTOCATALYST

Titanium Dioxide Thin Films Produced on FTO Substrate Using the Sol-Gel Process: The Effect of the Dispersant on Optical, Surface and Electrochemical Features

The Preparation of TiO2 Film by the Sol-Gel Method and Evaluation of Its Self-Cleaning Property

Controllable and facile one-pot synthesis of high surface area amorphous, crystalline, and triphasic TiO2: catalytic and photocatalytic applications