Abstract:Thanks to the available ultra-wide wavelength range compared with broadband laser sources, the use of blackbody radiators in photoacoustic spectroscopy features the simultaneous detection of multiple gas species in the presence of cross-interfering absorption lines. The major problem associated with broadband incoherent sources is less power and less stable intensity per wavenumber than lasers and leads to limited gas detection sensitivity. In this paper, the detectivity of a broadband double optical path differential photoacoustic system was enhanced with the development of dimension-optimized high-responsivity T-resonators for simultaneous multiple trace gas detection. Enhanced Q-factor and external noise suppression level constitute dual criteria for the optimization of T-resonators. Three digital signal processing algorithms were separately investigated which further improved gas dectectability. The capability of the multiple–trace-gas detection framework was verified by measuring CO2, C2H2 and H2O simultaneously. The spectral results processed by a wavelet denoising algorithm present the best performance in terms of background noise suppression and spectral feature fidelity. [Q2.2] With the absorption enhancement of the optimized T-cells and background suppression of the wavelet denoising algorithm, a broadband differential photoacoustic system was achieved with only a 30 mW globar source and normalized noise equivalent absorption coefficient value of 4.1 × 10−10 W·cm−1·Hz−1/2 which is two orders of magnitude improvement over the original T-cell-based photoacoustic configuration. The noise equivalent detection limits were found to be 223 ppbv for CO2, 625 ppbv for C2H2 and 865 ppbv for H2O, respectively.

Photoacoustic characteristics of carbon-based infrared absorbers

Analysis of Carbon Materials with Infrared Photoacoustic Spectroscopy

In situ measurement of the infrared absorption and extinction of chemical and biologically derived aerosols using flow-through photoacoustics

Cantilever-enhanced photoacoustic measurement of light-absorbing aerosols

Photoacoustic Method to Detect CO and Soot Particles Generated by Fire

In Situ Gas Filter Correlation: Photoacoustic CO Detection Method for Fire Warning

GFC Photoacoustic Measurement Method for Fire Products

Integrate Photoacoustic Method And Soot Scattering Theory To Detect Fire

New Model for a Photoacoustic Fire Detection System

Quantification of Optical Absorption Coefficients from Acoustic Spectra with Photoacoustic Tomography

Photoacoustic Detection of Volatile Organic Compounds

Photoacoustic and GFC Combined CO Sensing

Photoacoustic spectroscopy for analytical measurements

A versatile integrating sphere based photoacoustic sensor for trace gas monitoring

High-Resolution Photoacoustic Study of Acetylene Between 11 500 and 11 900 Cm−1 Using a Titanium:Sapphire Ring Laser

Calibration-free infrared absorption spectroscopy using cantilever-enhanced optical power detection

Design and structural optimization of T-resonators for highly sensitive photoacoustic trace gas detection

Thermal Characterization of Absorbing Coatings for Thermal Detectors of Radiation by Photopyroelectric Method

Versatile photoacoustic spectrometer based on a mid-infrared pulsed optical parametric oscillator

Photoacoustic Combined Sensing for CO and Smoke in Fire Products

Ultrafast measurement of photoacoustic parameters with mid-infrared frequency comb transients