Abstract:Recently, 3D composites have gained prominence over 2D composites due to their remarkable through-the-thickness reinforcement that enhanced performances of structures subject to multi-directional stress conditions. However, it is at the expense of reduced in-plane properties. 3D composites also increased damage tolerance due to their high impact and delamination resistance properties, which are susceptible in 2D composites. In aeronautics, both are major concerns in primary structures such as lifting and control surfaces due to high vibrational loads from the airflow. Advancements in the aeroelasticity of aircraft structures show an increasing trend in using smart materials with composite structures for improved aeroelastic performance. An example is combining shape memory alloys (SMAs) with composites for improving damping, stiffness, and vibrational characteristics by utilizing stress generation and strain accommodation properties of SMAs in response to temperature and load, respectively. Published works are mostly numerical in nature, and experimental research is noticeably lacking as aeroelasticity is multidisciplinary and involves both structural and aerodynamic methodology. In this work, 3D composites with embedded SMA wires (for improved in-plane properties) are evaluated in terms of flutter performance in wind tunnel flutter testing under low airspeed conditions. Three 3D orthogonal interlock configurations with a different interlocking pattern of yarns with SMA wire were considered. These 3D configurations are layer-to-layer (L2L), through-the-thickness (TT), and a modified interlock (MF) structure that provides the strongest grip to SMA wire than L2L and TT. The effect of SMA positioning, at mid and near to trailing and leading edges of the cantilevered composite plate, on the aeroelastic flutter properties is also investigated. Results showed that activating SMA wires embedded in 3D structures have significantly improved post-flutter properties while there is a decrement in flutter speed and flutter frequency due to increased flexibility of deflected plate in the airflow by SMA-induced stresses. Among 3D structures, L2L with SMA near to trailing edge showed significant improvement in post-flutter properties by decreasing 22.2% in twist limit cycle oscillation (LCO) amplitude while L2L with SMA at mid showed a decrement of 9.5% for bending LCO amplitude. Hence, this work showed that embedding SMA is beneficial for mitigating the post-flutter vibrations but at the consequence of reduced flutter speed and frequency of flexible composite plate.

Effect of Embedded Shape Memory Alloy (SMA) on the Low-velocity Impact Behaviour of Stringer Stiffened Composite Plates

Two-Dimensional Analysis of Shape Memory Alloys under Small Loadings

A new nonlinear finite element model for transient dynamic response of a micro composite plate embedded with micro SMA wires considering the size effects

The Low Velocity Impact Response Of Shape Memory Alloy Hybrid Polymer Composites

Large Deformation Dynamic Characteristics of Cracked Laminated Panel and Improvement of Stiffness Using Shape Memory Alloy Fiber

Thermo-aeroelastic analysis of triangular composite plate with embedded shape memory alloy at supersonic flow

Computational Modeling and Parametric Analysis of SMA Hybrid Composite Plates under Thermal Environment

Investigation on high strain rate response of lightweight sandwich panel with aluminum corrugated core and smart composite facesheets

Experimental study on the low-velocity impact failure mechanism of foam core sandwich panels with shape memory alloy hybrid face-sheets

The Low Velocity Impact Response Of Foam Core Sandwich Panels With A Shape Memory Alloy Hybrid Face-Sheet

Variable stiffness mechanism of flexible composite laminates implanted with modular SMAHC

Nonlinear Bending of Composite Circular Plates with Embedded Shape Memory Alloy Fibers

Thermal Post-buckling Analysis of Laminated Composite Plates Embedded with Shape Memory Alloy Fibers Using Semi-analytical Finite Strip Method

Low-velocity impact behaviors of glass fiber-reinforced polymer laminates embedded with shape memory alloy

Simulation of Eccentric Impact of Square and Rectangular Composite Laminates Embedded with SMA

Experimental investigation on hysteretic properties and applications in beam-column connections of shape memory alloy plates

Influence of Embedded SMA on Fatigue Properties of CFRP

Flutter and Thermal Buckling Analysis for Composite Laminated Panel Embedded with Shape Memory Alloy Wires in Supersonic Flow

Flutter performance of shape memory alloy-embedded 3D woven flexible composite plate under subsonic flow

Experimental and numerical analysis of bending performance for a glass-epoxy composite with integrated sheet-shaped shape memory alloy actuator elements

Enhancing Mechanical Behavior and Energy Dissipation in Fiber-Reinforced Polymers through Shape Memory Alloy Integration: A Numerical Study on SMA-FRP Composites under Cyclic Tensile Loading