Abstract:Conventional fiber-reinforced polymers (FRPs) have a relatively linear stress-strain behavior up to the failure point. Therefore, they show brittle behavior until the failure point. Shape memory alloys, in addition to having high ductility and good energy dissipation capability, are highly resistant to corrosion and show good performance against fatigue. Therefore, using the SMA fibers in the production of FRPs can be a suitable solution to solve the problem of the brittle behavior of conventional FRPs. SMA fibers can be integrated with a polymeric matrix with or without conventional fibers and create a new material called SMA-FRP. This study investigates the effect of using different volume fractions of conventional fibers (carbon, glass, and aramid) and SMA fibers (NiTi) in the super-elastic phase and the effect of the initial strain of SMA fibers on the behavior of SMA-FRP composites under cyclic tensile loading. Specimens are designed to reach a target elastic modulus and are modeled using OpenSees (v. 3.5.0) finite element software. Analyzing the results shows that in the SMA-FRP composites that are designed to reach a target elastic modulus, with an increase in the volume fraction of SMA fibers, the maximum stress, residual strain, and strain hardening ratio are reduced, and the ability to energy dissipation capability and residual stress increases. It was also observed that increasing the percentage of the initial strain of SMA fibers increases the maximum stress and energy dissipation capability and reduces the residual strain and yield stress. In the investigation of the effect of the type of conventional fibers used in the construction of composites, it was found that the use of fibers that have a larger failure strain increases the maximum stress and energy dissipation capability of the composite and reduces the strain hardening ratio. In addition, increasing the elastic modulus of conventional fibers increases the residual strain and residual stress of the composites.

Large Deformation Dynamic Characteristics of Cracked Laminated Panel and Improvement of Stiffness Using Shape Memory Alloy Fiber

Dynamic Analysis of Shape-Memory-Alloy-Reinforced Damaged Layered Panel: Reversal of Structural Stiffness

Two-Dimensional Analysis of Shape Memory Alloys under Small Loadings

A new nonlinear finite element model for transient dynamic response of a micro composite plate embedded with micro SMA wires considering the size effects

Experimental study on the low-velocity impact failure mechanism of foam core sandwich panels with shape memory alloy hybrid face-sheets

Effect of Embedded Shape Memory Alloy (SMA) on the Low-velocity Impact Behaviour of Stringer Stiffened Composite Plates

Study on reinforced concrete beams strengthened using shape memory alloy wires in combination with carbon-fiber-reinforced polymer plates

Strengthening Cracked Steel Plates with Shape Memory Alloy Patches: Numerical and Experimental Investigations

Nonlinear Fracture Analysis of Delamination Crack Jumps in Laminated Composites

Experimental and numerical investigation of damage evolution in carbon fiber reinforced polymer stiffened panel in post-buckling regime

Nonlinear dynamic behavior of a damaged laminated shell structure under time-dependent mechanical loading

Mechanical properties and damage mechanism of SMAHC laminates

Investigation on high strain rate response of lightweight sandwich panel with aluminum corrugated core and smart composite facesheets

Simulation of Eccentric Impact of Square and Rectangular Composite Laminates Embedded with SMA

Damage behavior analysis of unidirectional fiber reinforced shape memory polymer composites

The Low Velocity Impact Response Of Foam Core Sandwich Panels With A Shape Memory Alloy Hybrid Face-Sheet

Enhancing Mechanical Behavior and Energy Dissipation in Fiber-Reinforced Polymers through Shape Memory Alloy Integration: A Numerical Study on SMA-FRP Composites under Cyclic Tensile Loading

Experimental investigation on hysteretic properties and applications in beam-column connections of shape memory alloy plates

Dynamic Response and Deformative Mechanism of the Shape Memory Polymer Filled with Low-Melting-Point Alloy under Different Dynamic Loads

Structural and damage analysis of a programmable shape memory locking laminate with large deformation

Variable stiffness mechanism of flexible composite laminates implanted with modular SMAHC