Abstract:The cavity receiver's thermal conversion performance is critical for parabolic dish and tower Concentrated Solar Power (CSP) systems. Distinct from precedent research aiming to increase the receiver's absorption through cavity geometry optimization, the objective of this work was to investigate the thermal conversion performance of a novel, positive conical cavity receiver design, following the heat loss reduction approach with simplified pipe forming, to stress the effectiveness of this approach in cavity receiver design, and to provide data for future optimization of the proposed design. To accomplish these goals, the novel receiver and existing designs' heat flux absorption and heat loss are compared numerically. The resulting conversion power is also experimentally validated. The concept is inspired by analysis of formulas, suggesting the novel design may realize a thermal conversion improvement of 8.6%, at 650 K, and increases with the rise in temperature. The comprehensive numerical investigation combines ray tracing of identical incoming radiation to investigate the receiver absorption and CFD methods to investigate the cavities' heat loss at identical temperatures. The absorption acquired is unoptimized. The novel design can reduce the heat loss by as much as 91.8% when compared with a negative conical design at 650 K, resulting in a 12.3% improvement in conversion power. The experimental investigation measures the energy conversion to the working fluid in different cavities under identical incoming radiation. The novel receiver outperforms by over 5.6% in the setup. After correcting boundary conditions using experiment measurements, the experimental and numerical results are comparable. This research proves that the novel positive conical receiver has a better thermal conversion performance over 650 K; thus, the heat loss reduction approach is effective and feasible in receiver designs within this temperature range.

Wind-induced convective heat loss of cylindrical receiver considering the effect of dish concentrator

Numerical Simulation on Convective Thermal Loss of A Cavity Receiver in A Solar Tower Power Plant

A numerical study to investigate the flow pattern around parabolic dish receiver system

Optical efficiency and convective heat loss of a cylindrical-hemispherical receiver used in parabolic dish concentrator

Modeling of the Dish Receiver with the Effect of Inhomogeneous Radiation Flux Distribution

Study on combined heat loss of a dish receiver with quartz glass cover

Thermal Losses Evaluation of an External Rectangular Receiver in a Windy Environment

Numerical Investigation of the Natural Convective Heat Loss of a Solar Central Cavity Receiver with Air Curtain

Heat Transfer Analysis of a Volumetric Solar Receiver by Coupling the Solar Radiation Transport and Internal Heat Transfer

An optimized model and test of the China’s first high temperature parabolic trough solar receiver

Thermal performance simulation of a solar cavity receiver under windy conditions

An experimental investigation on thermal and optical analysis of cylindrical and conical cavity copper tube receivers design for solar dish concentrator

Heat Loss Reduction Approach in Cavity Receiver Design Based on Performance Investigation of a Novel Positive Conical Scheme

Integrated optical-thermal model and deep learning technique to estimate the performance of a conical cavity receiver coupled solar parabolic dish collector

Numerical Simulation of Mixed Convection in Solar Cavity Receiver for Hydrogen Production

Heat Transfer Performance Evaluation of a Large-Size Cavity Receiver in the Solar Power Tower Plant Based on Angle Factors

Radiation Performance of Dish Solar Concentrator/Cavity Receiver Systems

Experimental investigation on heat-transfer characteristics of a cylindrical cavity receiver with pressurized air in helical pipe

Numerical Investigation on Porous Media Heat Transfer in A Solar Tower Receiver

Heat losses and thermal stresses of an external cylindrical water/steam solar tower receiver

Numerical Study on Thermal Performance of a Solar Cavity Receiver with Different Depths