Abstract:A series of laboratory experiments were conducted to investigate the effect of freeze–thaw (FT) cycles on mechanical properties and chloride permeability of concrete with the strength class of C30 in this paper. The mechanical property tests were performed on the specimens subjected to 0, 5, 15, 30, 50, 75 and 100 standard FT cycles to determine the compressive strength, normalized dynamic elastic modulus (NDEM) and mass loss. Also, the chloride natural diffusion tests of concrete specimens, after 0, 5, 15, 30 and 50 FT cycles, were conducted in a self-design tidal cycling simulation device to investigate the chloride ingress into concrete in marine environment of tidal zone. Based on the Fick's second law, a time-dependent model was developed to predict the chloride profiles of frost-damaged concrete. Additional FT cycling tests at different minimum temperatures of freezing process (−4 and −11 °C) and the chloride natural diffusion tests were conducted to study the effect of minimum temperature on the chloride diffusion in concrete. The experimental results revealed the significant influence of FT action on the mass loss, compressive strength and NDEM. After 50 FT cycles, the mean of NDEM dropped to 60%, indicating that the specimen was destroyed by FT action. With the decrease of minimum freezing temperature, the loss of NDEM increased apparently, performing a good linear relation. A substantial effect of FT damage on the chloride profiles was observed: compared to the counterparts of the control groups without being exposed to FT attack, chloride concentration was larger for the frost-damaged concrete, and this difference increased with the extension of exposure duration. A linear relation between the apparent chloride diffusion coefficient and the loss of NDEM was also obtained regardless of the exposure time. Moreover, it was found that the proposed model was applicable for the prediction of chloride profiles in concrete subjected to FT cycles at different minimum freezing temperatures. In other words, the proposed model can be used to describe the chloride ingress into frost-damaged concrete, regardless of the cause of the damage (due to the number of FT cycles or the minimum freezing temperature).

Effects of curing conditions with different temperature and humidity on damage evolution of concrete during freeze–thaw cycling

Development of Internal Moisture Transfer and Cumulative Residual Strain in Concrete under Freeze-Thaw Cycles

Relative humidity and deterioration of concrete under freeze–thaw load

Experimental Study on Mechanical Properties and Pore Structure Deterioration of Concrete under Freeze–Thaw Cycles

Effect of Saturation Degree on Concrete Deterioration Due to Freeze-Thaw Action

Study on Freezing-Thawing damage mechanism and evolution model of concrete

Stress Analysis for Concrete Materials under Multiple Freeze-Thaw Cycles

Influence of damage degree on the degradation of concrete under freezing-thawing cycles

Influence of Drying Conditions on the Durability of Concrete Subjected to the Combined Action of Chemical Attack and Freeze-Thaw Cycles

Macroscopic and Mesoscopic Deterioration Behaviors of Concrete under the Coupling Effect of Chlorine Salt Erosion and Freezing–Thawing Cycle

Experimental studies on the chloride ion permeability of concrete considering the effect of freeze–thaw damage

Environmental Factors Influencing The Durability Of Concrete Structures In Frost Environments

Mesoscale Simulation of Fatigue Behavior of Concrete Materials Damaged by Freeze-Thaw Cycles

Meso-Scale Mechanical Deterioration Of Mortar Subjected To Freeze Thaw Cycles And Sodium Chloride Attack

Effects of Freeze-Thaw Cycles on the Behavior of the Bond Between CFRP Plates and Concrete Substrates

Change of the Coefficient of Thermal Expansion of Mortar Due to Damage by Freeze Thaw Cycles

Experimental Study and Mechanism Analysis on Frost Resistance of Normal Performance Concrete under Different Environments

Quantifying Effect of Later Curing on Pores of Paste Subject to Early-Age Freeze-Thaw Cycles by Different Techniques

Freeze–Thaw Damage Characteristics of Concrete Based on Compressive Mechanical Properties and Acoustic Parameters

CRYO-DAMAGE OF CEMENTITIOUS MATERIALS SUBJECT TO DIFFERENT FREEZING RATES

Experimental Evaluation of the Concrete Damage and Pore Characteristics under Salt-Freezing Cycles