Abstract:A new technology to the pharmaceutical field is presented: surface decontamination by plasmas The technology is comparable to established barrier systems like e-beam, volatile hydrogen peroxide, or radiation inactivation of microbiological contaminations. This plasma technology is part of a fully automated and validated syringe filling line at a major pharmaceutical company and is in production operation. Incoming pre-sterilized syringe containers ("tubs") are processed by plasma, solely on the outside, and passed into the aseptic filling isolator upon successful decontamination. The objective of this article is to present the operating principles and develop and establish a validation routine on the basis of standard commercial biological indicators. Their decontamination efficacies are determined and correlated to the actual inactivation efficacy on the pharmaceutical packaging material.The reference setup is explained in detail and a short presentation of the cycle development and the relevant plasma control parameters is given, with a special focus on the in-process monitor determining the cycle validity. Different microbial inactivation mechanisms are also discussed and evaluated for their contribution and interaction to enhance plasma decontamination. A material-dependent inactivation behavior was observed. In order to be able to correlate the tub surface inactivation of Geobacillus stearothermophilus endospores to metallic biological indicators, a comparative study was performed. Through consistently demonstrating the linear inactivation behavior between the different materials, it becomes possible to develop an effective and time-saving validation scheme. Lay abstract: The challenge in new decontamination systems lies in a thorough validation of the inactivation efficacy under different operating regimes. With plasma, as an ionized gas, a new barrier concept is introduced into pharmaceutical aseptic processing of syringes. The presented system operates in vacuum and only decontaminates the outer surface of pre-sterilized syringe containers ("tubs"), before they are transferred into the aseptic area. The plasma does not penetrate into the tub. This article discusses the phase from development and test germ selection, across the identified sporicidal mechanisms, to a proposal for a validation scheme on the basis of commercially available biological indicators. A special focus is placed on an extensive investigation to establish a link between the tub surface microbial kill (polystyrene and Tyvek(and (2)) ) and biological indicator inactivation (stainless steel). Additionally, a rationale is developed on how an optical in-process monitor can be applied to establish a validatable limit on the base of the predetermined inactivation data of Geobacillus stearothermophilus endospores.

Reduce and refine: Plasma treated water vs conventional disinfectants for conveyor-belt cleaning in sustainable food-production lines

Priming with Nano-Aerosolized Water and Sequential Dip-Washing with Hydrogen Peroxide: an Efficient Sanitization Method to Inactivate Salmonella Typhimurium LT2 on Spinach

Bactericidal effects of nonthermal low-pressure oxygen plasma on S. typhimurium LT2 attached to fresh produce surfaces

Plasma Decontamination: A Case Study on Kill Efficacy of Geobacillus stearothermophilus Spores on Different Carrier Materials

Optimisation of plasma process for decontamination of bacterial contaminants on polymeric food packaging materials

Implementing water recirculation in a novel portable plasma-activated water reactor enhances antimicrobial effect against Escherichia coli

Off-site production of plasma-activated water for efficient sterilization: the crucial role of high-valence NOx and new chemical pathways

Plasma-Functionalized Liquids for Decontamination of Viable Tissues: A Comparative Approach

Off-site production of plasma-activated water for efficient disinfection: The crucial role of high valence NOx and new chemical pathways

An Effective Sanitizer for Fresh Produce Production: In Situ Plasma-Activated Water Treatment Inactivates Pathogenic Bacteria and Maintains the Quality of Cucurbit Fruit

Deep Impact: Shifts of Native Cultivable Microbial Communities on Fresh Lettuce after Treatment with Plasma-Treated Water

Effects of Plasma on Physical Properties of Water: Nanocrystalline-to-Amorphous Phase Transition and Improving Produce Washing

Pulsed-control plasma-activated water: An emerging technology to assist ultrasound for fresh-cut produce washing

Upgrading the Production of Plasma-Activated Water for Sterilization by Preloading Long-Lived Reactive Species

Effectiveness of Chemical Sanitizers against Salmonella Typhimurium in Nutrient Film Technique (NFT) Hydroponic Systems: Implications for Food Safety, Crop Quality, and Nutrient Content in Leafy Greens

Inactivation of biofilm-forming bacteria using cold atmospheric plasmas and potential application for decontamination of fresh foods

Protein-Based Rechargeable and Replaceable Antimicrobial and Antifouling Coatings on Hydrophobic Food-Contact Surfaces

Plasma Sterilization Effectively Reduces Bacterial Contamination in Dental Unit Waterlines

Efficient treatment of bio-contaminated wastewater using plasma technology for its reuse in sustainable agriculture

Biocompatible plasma-treated liquids: A sustainable approach for decontaminating gastrointestinal-infection causing pathogens

Development of a Test Method for Analyzing the Hygienic Performance of Commercial Dishwashers Operating on the Fresh Water Principle