Abstract:A new technology to the pharmaceutical field is presented: surface decontamination by plasmas The technology is comparable to established barrier systems like e-beam, volatile hydrogen peroxide, or radiation inactivation of microbiological contaminations. This plasma technology is part of a fully automated and validated syringe filling line at a major pharmaceutical company and is in production operation. Incoming pre-sterilized syringe containers ("tubs") are processed by plasma, solely on the outside, and passed into the aseptic filling isolator upon successful decontamination. The objective of this article is to present the operating principles and develop and establish a validation routine on the basis of standard commercial biological indicators. Their decontamination efficacies are determined and correlated to the actual inactivation efficacy on the pharmaceutical packaging material.The reference setup is explained in detail and a short presentation of the cycle development and the relevant plasma control parameters is given, with a special focus on the in-process monitor determining the cycle validity. Different microbial inactivation mechanisms are also discussed and evaluated for their contribution and interaction to enhance plasma decontamination. A material-dependent inactivation behavior was observed. In order to be able to correlate the tub surface inactivation of Geobacillus stearothermophilus endospores to metallic biological indicators, a comparative study was performed. Through consistently demonstrating the linear inactivation behavior between the different materials, it becomes possible to develop an effective and time-saving validation scheme. Lay abstract: The challenge in new decontamination systems lies in a thorough validation of the inactivation efficacy under different operating regimes. With plasma, as an ionized gas, a new barrier concept is introduced into pharmaceutical aseptic processing of syringes. The presented system operates in vacuum and only decontaminates the outer surface of pre-sterilized syringe containers ("tubs"), before they are transferred into the aseptic area. The plasma does not penetrate into the tub. This article discusses the phase from development and test germ selection, across the identified sporicidal mechanisms, to a proposal for a validation scheme on the basis of commercially available biological indicators. A special focus is placed on an extensive investigation to establish a link between the tub surface microbial kill (polystyrene and Tyvek(and (2)) ) and biological indicator inactivation (stainless steel). Additionally, a rationale is developed on how an optical in-process monitor can be applied to establish a validatable limit on the base of the predetermined inactivation data of Geobacillus stearothermophilus endospores.

Optimisation of plasma process for decontamination of bacterial contaminants on polymeric food packaging materials

Plasma Decontamination: A Case Study on Kill Efficacy of Geobacillus stearothermophilus Spores on Different Carrier Materials

In-package plasma: From reactive chemistry to innovative food preservation technologies

Recent Advances in Plasma Technology: Influence of Atmospheric Cold Plasma on Spore Inactivation

Efficacy of Atmospheric Non‐thermal Plasma Corona Discharge Under Dry and Wet Conditions on Decontamination of Food Packaging Film Surfaces

Cold Plasma Technology Based Eco-Friendly Food Packaging Biomaterials

Proposing an Affordable Plasma Device for Polymer Surface Modification and Microbial Inactivation

Reduce and refine: Plasma treated water vs conventional disinfectants for conveyor-belt cleaning in sustainable food-production lines

Effect of Cold Plasma Treatment on the Packaging Properties of Biopolymer-Based Films: A Review

Modification and improvement of biodegradable packaging films by cold plasma; a critical review

Cold Plasma–Based Hurdle Interventions: New Strategies for Improving Food Safety

Innovative sterilization technology - bacterial inactivation by cold argon plasma

Non-Equilibrium Plasma Processing for the Preparation of Antibacterial Surfaces

Plasma-Functionalized Liquids for Decontamination of Viable Tissues: A Comparative Approach

In package control of Rhyzopertha dominica in wheat using a continuous atmospheric jet cold plasma system

A review on recent advances in cold plasma technology for the food industry: Current applications and future trends

Implementing water recirculation in a novel portable plasma-activated water reactor enhances antimicrobial effect against Escherichia coli

Recent Advances in Cold Plasma Technology for Food Processing

Bacterial Decontamination of Water-Containing Objects Using Piezoelectric Direct Discharge Plasma and Plasma Jet

Emerging techniques in food science: the resistance of chlorpyrifos pesticide pollution against arc and dielectric barrier discharge plasma

Non‐thermal plasma decontamination of microbes: a state of the art