Abstract:The configuration of a recently installed CO2 heat pump system with a cooling capacity of 33.5 kW and heating capacity of 35.8 kW used on a dairy farm is presented. This system has been studied in order to determine the optimal performance when used for combined water heating and refrigeration. Furthermore, the effect of the interstage pressure on the CO2 heat pump system has been investigated. This required the development of a thermodynamic cycle based on the configuration of the actual constructed system and data acquired from monitoring. A compressor model with a compression ratio over three was developed and validated against experimental data with an acceptable agreement. The numerical model of the counter-flow heat exchanger between water and sCO(2) has been developed assuming that the water outlet temperature is variable (just over the set water temperature), which is more consistent with actual practice. In the desktop study, the optimal COPs for heating, cooling and combined performance have been simulated considering the interstage pressure, discharge pressure and gas cooler outlet temperature. It was found that the optimal combined COPs generally decrease from 3.84 to 3.68 with the interstage pressure from 29.65 bar to 53.60 bar. Through optimisation of discharge pressure, it was found that the optimal combined COP of 4.27 occurs at the same pressure where the optimal heating COP of 2.63 is achieved (at a discharge pressure of 94 bar), while the optimal cooling COP of 1.66 occurs when the discharge pressure is around 88 bar. A further optimisation study was conducted based on a fixed cooling capacity, and it was found that the optimal cooling COP of 1.78 can be achieved when the discharge pressure is 80 bar, while the optimal heating and combined COPs are still achieved at the same discharge pressure of 93 bar (with the heating COP of 2.59 and combined COP of 4.18). Based on the simulation results, it can be summarised that the overall system thermal performance designed for heating and refrigeration is dominated by the heating performance.

Thermodynamic and economic analysis of two-stage CO2 Heat Pump with reverse Brayton cycle

Thermodynamic Analysis on a Two-Stage Transcritical CO2 Heat Pump Cycle with Double Ejectors

Performance Analysis and Evaluation of a Supercritical CO2 Rankine Cycle Coupled with an Absorption Refrigeration Cycle

A Theoretical Study of an Innovative Ejector Enhanced Vapor Compression Heat Pump Cycle for Water Heating Application

Thermodynamic Analysis and Experimental Investigation of Internal Heat Exchanger Influence on CO<sub>2</sub> Trans-Critical Cycle Performance

Thermodynamic Analysis and Experimental Investigation of Internal Heat Exchanger Influence on CO2 Trans-Critical Cycle Performance

Theoretical Study of a High-Temperature Heat Pump System Composed of a CO 2 Transcritical Heat Pump Cycle and a R152a Subcritical Heat Pump Cycle

High Temperature Transcritical CO2 Heat Pump with Optimized Tube-in-tube Heat Exchanger

Experimental Study on Commercial Water Source Heat Pump with Transcritical CO2 Cycle

Thermodynamics Analysis of the Transcritical CO2 Heat Pump for Heating Applications

Thermodynamic and economic analysis and multi-objective optimization of a novel transcritical CO2 Rankine cycle with an ejector driven by low grade heat source

An optimisation study on a real-world transcritical CO<sub>2</sub> heat pump system with a flash gas bypass

Thermo-economic Analysis and Comparative Study of Transcritical Power Cycles Using CO2-based Mixtures As Working Fluids

Performance Analysis and Operation Optimization of Air-to-water CO2 Heat Pump with Phase Change Thermal Storage

Thermodynamic analysis of cascade high-temperature heat pump using new natural zeotropic refrigerant mixtures: R744/R600 and R744/R601

Experimental Study of Performance Characteristics on Transcritical CO2 Commercial Water Source Heat Pump

Comprehensive Evaluation of the Transcritical CO2 Ejector-Expansion Heat Pump Water Heater

Transcritical-transcritical cascade CO2 heat pump cycles for high-temperature heating: A numerical evaluation

Thermal evaluation of heat exchanger and a dry-cooled supercritical CO 2 mixture Brayton cycle based on three-dimensional and one-dimensional models: Key factors and potential applications

Thermal Evaluation of Heat Exchanger and a Dry-Cooled Supercritical CO2 Mixture Brayton Cycle Based on Three-Dimensional and One-Dimensional Models: Key Factors and Potential Applications

Transcritical R41 Single-Stage Compression Heat Pump Cycle with Internal Heat Exchanger