Abstract:Nitrogen dioxide (NO2) detection is of great importance because the emission of NO2 gas profoundly endangers the natural environment and human health. However, a few challenges, including lowering detection limit, improving response/recovery kinetics, and reducing working temperature, should be further addressed before practical applications. Herein, a series of N-doped graphene quantum dot (N-GQD)-modified three-dimensional ordered macroporous (3DOM) In2O3 composites are constructed and their NO2 response properties are studied. The results show that compared to pure 3DOM In2O3, reduced graphene oxide (rGO)/3DOM In2O3, and N-doped graphene sheets (NS)/3DOM In2O3, the N-GQDs/3DOM In2O3 sensing materials exhibit higher NO2 responses with fast response and recovery speed and low working temperature (100 °C). In addition, the detection limit of NO2 response for the optimal N-GQDs/In2O3 sensor is as low as 100 ppb. Upon exposure to CO, CH4, NH3, acetone, ethanol, toluene, and formaldehyde, only very weak responses could be observed, indicating good selectivity for the synthesized material. More attractively, the responses of the optimized N-GQDs/In2O3 sensor exhibit no obviously big fluctuation over 60 days, implying good long-term stability. We suggest that the formation of heterojunctions between 3DOM In2O3 and N-GQDs and the doping N atoms in N-GQDs play crucial roles in improving the NO2 sensing properties.The Supporting Information is available free of charge at <a class="ext-link" href="/doi/10.1021/acsami.0c03369?goto=supporting-info">https://pubs.acs.org/doi/10.1021/acsami.0c03369</a>.SEM images of rGO/In1 and NS/In1; TEM images of NS; AFM, cathodic scan, and anodic scan of N-GQDs; survey XPS spectra of In2O3, N-GQDs, and NG/In1; Mott–Schottky plots and UPS of In2O3 and N-GQDs; DRS spectra and (ahν)2 vs hν plot of In2O3; EIS and PL spectra of In2O3 and NG/In1; FT-IR spectra of In2O3 and NG/In1 after adsorption of NO2; dynamic response, humidity stability, and the anti-interference test of NG/In1; and a comparison of some typical graphene and In2O3-based NO2 gas sensors with that of NG/In1 sensor in this work (<a class="ext-link" href="/doi/suppl/10.1021/acsami.0c03369/suppl_file/am0c03369_si_001.pdf">PDF</a>)This article has not yet been cited by other publications.

What problem does this paper attempt to address?

The main problem that this paper attempts to solve is to improve the detection performance of nitrogen oxide (NO₂) gas sensors at low temperatures. Specifically, the researchers constructed a series of three - dimensional ordered macroporous indium oxide (3DOM In₂O₃) composites modified by nitrogen - doped graphene quantum dots (N - GQDs), and studied the response characteristics of these materials to NO₂. The main objectives include: 1. **Improve NO₂ response**: By constructing 3DOM In₂O₃ composites modified by N - GQDs, achieve a higher NO₂ response value. 2. **Accelerate response and recovery speed**: Optimize the materials to obtain faster response time and recovery time. 3. **Reduce working temperature**: Enable the sensor to operate effectively at a lower working temperature, thereby reducing energy consumption and improving stability. 4. **Enhance selectivity**: Ensure that the sensor has higher selectivity for NO₂ than other interfering gases, such as CO, CH₄, NH₃, acetic acid, ethanol, toluene and formaldehyde. 5. **Improve long - term stability**: Ensure that the sensor can still maintain stable performance after long - term use. Through these improvements, the researchers hope to develop a high - performance NO₂ gas sensor that can quickly and accurately detect the NO₂ concentration in the environment, thereby better protecting the environment and human health.

N-Doped Graphene Quantum Dot-Decorated Three-Dimensional Ordered Macroporous In 2 O 3 for NO 2 Sensing at Low Temperatures

Nitrogen-doped graphene quantum dots-modified mesoporous SnO2 hierarchical hollow cubes for low temperature detection of nitrogen dioxide

Three-Dimensional-Structured Boron- and Nitrogen-Doped Graphene Hydrogel Enabling High-Sensitivity NO2 Detection at Room Temperature

Zn–Co Zeolitic Imidazolate Framework Nanoparticles Intercalated in Graphene Nanosheets for Room-Temperature NO 2 Sensing

Three-Dimensional MoS2/Reduced Graphene Oxide Nanosheets/Graphene Quantum Dots Hybrids for High-Performance Room-Temperature NO2 Gas Sensors

Enabling Quick Response to Nitrogen Dioxide at Room Temperature and Limit of Detection to Ppb Level by Heavily n-Doped Graphene Hybrid Transistor

Engineering SnO 2 nanorods/ethylenediamine-modified graphene heterojunctions with selective adsorption and electronic structure modulation for ultrasensitive room-temperature NO 2 detection

High-performance NO 2 gas sensor enabled by Fe, N co-doped GQDs modification and pulse-driven temperature modulation

Two-dimensional Cd-doped Porous Co3O4 Nanosheets for Enhanced Room-Temperature NO2 Sensing Performance

High Performance Acoustic Wave Nitrogen Dioxide Sensor with Ultraviolet Activated 3D Porous Architecture of Ag-Decorated Reduced Graphene Oxide and Polypyrrole Aerogel

In-situ sulfidation-derived three-dimensional cobalt sulfide nanoflower/graphene nanosheet hybrid for ultrasensitive room-temperature NO2 gas sensor

3D micro-combs self-assembled from 2D N-doped In2S3 for room-temperature reversible NO2 gas sensing

Synthesis of new functionalized reduced graphene oxide quantum dot composite for high-performance NO2 gas sensor

Advanced 2D nanosheet-based gas sensor for sensitive detection of low concentration NO2 gas using In2O3/Ti3C2 layers

Gas sensors based on SnS 2 /In 2 O 3 for high performance NO 2 detection at room temperature

Synthesis of Cu2O-Modified Reduced Graphene Oxide for NO2 Sensors

Construction of organic-inorganic “chelate” adsorption sites on metal oxide semiconductor for room temperature NO2 sensing

Hollow Cu2O nanospheres loaded with MoS2/reduced graphene oxide nanosheets for ppb-level NO2 detection at room temperature

Au-decorated Porous Structure Graphene with Enhanced Sensing Performance for Low-Concentration NO 2 Detection

N-Doped Carbon Dots/Sns2 Heterostructures for Ultra-Fast and Sub-Ppb-Level Detection of No2 in Multiple Environments

High-performance selective NO2 gas sensor based on In2O3–graphene–Cu nanocomposites