Abstract:Electrochemical wastewater treatment is a promising technique to remove recalcitrant pollutants from wastewater. However, the complexity of elucidating the underlying degradation mechanisms hinders its optimisation not only from a techno-economic perspective, as it is desirable to maximise removal efficiencies at low energy and chemical requirements, but also in environmental terms, as the generation of toxic by-products is an ongoing challenge. In this work, we propose a novel combined experimental and computational approach to (i) estimate the contribution of radical and non-radical mechanisms as well as their synergistic effects during electrochemical oxidation and (ii) identify the optimal conditions that promote specific degradation pathways. As a case study, the distribution of the degradation mechanisms involved in the removal of benzoic acid (BA) via boron-doped diamond (BDD) anodes was elucidated and analysed as a function of several operating parameters, i.e., the initial sulfate and nitrate content of the wastewater and the current applied. Subsequently, a multivariate optimisation study was conducted, where the influence of the electrode nature was investigated for two commercial BDD electrodes and a customised silver-decorated BDD electrode. Optimal conditions were identified for each degradation mechanism as well as for the overall BA degradation rate constant. BDD selection was found to be the most influential factor favouring any mechanism (i.e., 52-85% contribution), given that properties such as its boron doping and the presence of electrodeposited silver could dramatically affect the reactions taking place. In particular, decorating the BDD surface with silver microparticles significantly enhanced BA degradation via sulfate radicals, whereas direct oxidation, reactive oxygen species and radical synergistic effects were promoted when using a commercial BDD material with higher boron content and on a silicon substrate. Consequently, by simplifying the identification and quantification of underlying mechanisms, our approach facilitates the elucidation of the most suitable degradation route for a given electrochemical wastewater treatment together with its optimal operating conditions.

Electrochemical degradation of waters containing O-toluidine on PbO2 and BDD anodes

Chemical composition and direct electrochemical oxidation of table olive processing wastewater using high oxidation power anodes

Electrochemical Oxidation of Organics Wastewater Using PbO2 Electrodes

Base-metal Oxide Semiconductor Electrodes for PPCP Degradation: Ti-doped Α-Fe2o3 for Sulfosalicylic Acid Oxidation As an Example.

Electrochemical degradation of phenol in aqueous solution using PbO2 anode

Using Ti/Ti0.7Ru0.3O2 anode-type with a Flow Cell System for the Electrochemical Treatment of a Tannery Wastewater

Electrochemical degradation of Mordant Blue 13 azo dye using boron-doped diamond and dimensionally stable anodes: influence of experimental parameters and water matrix

[Comparative Study of Benzotriazole Electrochemical Oxidation at Boron-doped Diamond and PbO2 Anodes].

Anodic-Cathodic Electrochemical Oxidation System for O-Nitrophenol Degradation in Aqueous Solutions

Comparative Study of Oxidation Ability Between Boron-Doped Diamond (BDD) and Lead Oxide (pbo 2 ) Electrodes

Electrochemical oxidation of Reactive Blue 19 on boron-doped diamond anode with different supporting electrolyte

Electro-Catalysis Degradation of Desorbed Concentrated Organic Solution with Titanium-Based PbO2 Anode

Electrochemical Anodic Materials Used for Degradation of Organic Pollutants

A Novel Electrode for the Degradation of Methylene Blue in Electrochemical System: Preparation and Characterization

Anodic oxidation as promoting technology for treatment and reuse of industrial textile effluent using ruthenium-doped lead dioxide (PbO2) anode

Pulsed Electrochemical Oxidation of Acid Red G and Crystal Violet by PbO2 Anode

Degrade Methyl Orange by a Reverse Electrodialysis Reactor Coupled with Electrochemical Direct Oxidation and Electro-Fenton Processes

A combined experimental and computational approach to unravel degradation mechanisms in electrochemical wastewater treatment

Design of BDD-TiO2 Hybrid Electrode with P−N Function for Photoelectrocatalytic Degradation of Organic Contaminants

Enhanced Electrochemical Removal of Dye Wastewater by PbO2 Anodes Using Halloysite Nanotubes with Different Surface Charge Properties

Recent progress in engineering approach towards the design of PbO2-based electrodes for the anodic oxidation of organic pollutants