Abstract:Ettringite is the crucial hydrating phase controlling the rheology of the paste at the beginning of the cement hydration. Yet, while previous studies speculate on how the rheology of the paste depends on the morphology and size of ettringite, only limited data examine this question systematically in the C3A-CaSO4 system, probably linked to characterization limitation arising from the heterogeneous of cement paste and a small proportion of ettringite. On the other hand, polycarboxylate ether/ester (PCE) are well known to greatly modified the morphology and size of ettringite. It remains however unclear how PCE adsorption affects the growth of ettringite. In this paper, the effects of dosages of PCE on the growth of ettringite in deionized water and synthetic cement pore solution were investigated by using X-ray diffraction (XRD), thermogravimetry–differential thermogravimetry (TG-DTG) analysis, Fourier transform infrared (FTIR) spectroscopy, scanning electron microcopy (SEM) and total organic carbon (TOC) analyzer. Adsorption kinetics and isotherms of PCE on the surface of ettringite crystals were also examined. PCE exerted no effect on the types of products, but its adsorption changed the proportion, stability, and morphology of ettringite. Sulfate ions and PCE were adsorbed on the face of rectangular prism of ettringite crystals preferentially, which limited their growth in the {101¯0} faces and resulted in their longitudinal growth. The inhibition effect of PCE on the growth of ettringite crystals is positive correlated with its adsorption amount on ettringite and is weakened as the crystallization time increases. The adsorption kinetics and isotherms of PCE on the surface of ettringite followed the pseudo-second-order and Freundlich equations respectively.

The application of thermal analysis to study the hydration behavior of tricalcium aluminate-gypsum in the presence of polycarboxylate-based superplasticizers

Effect of Polycarboxylate Superplasticizers on the Growth of Ettringite in Deionized Water and Synthetic Cement Pore Solution

Hydration characteristics of tricalcium aluminate phase in mixes containing β-hemihydate and phosphogypsum

Utilization of tricalcium aluminate as modifier on phosphogypsum-based full solid-waste cementitious material

Calorimetric Study of Calcium Aluminate Cement Blended with Flue Gas Desulfurization Gypsum

Adsorption of polycarboxylate superplasticizer on gypsum particle surface

Effects of phosphogypsum on hydration properties and strength of calcium aluminate cement

Properties of Polycarboxylate Superplasticizers with Different Molecular Structure: A Comparative Study

Effects of Polycarboxylate Superplasticizers on Fluidity and Early Hydration in Sulfoaluminate Cement System

Effect of Gypsum on the Early Hydration of Cubic and Na-Doped Orthorhombic Tricalcium Aluminate

A Scanning Transmission X-ray Microscopy Study of Cubic and Orthorhombic C3A and Their Hydration Products in the Presence of Gypsum

Characterization and calorimetric study of early-age hydration behaviors of synthetic ye’elimite doped with the impurities in phosphogypsum

Hydration of tricalcium aluminate (C3A) in the presence and absence of gypsum—studied by Raman spectroscopy and X-ray diffraction

Effect of superplasticizers on hydration kinetics of ultrafine sulfoaluminate cement-based grouting material

A study on the interactions between polycarboxylate ether superplasticizer and montmorillonite

Study on the Effect of Main Chain Molecular Structure on Adsorption, Dispersion, and Hydration of Polycarboxylate Superplasticizers

Property of Water-Reducing and Crystallization on Superplasticize of the Concrete

Influences of PCE Superplasticizers with Varied Architectures on the Formation and Morphology of Calcium Hydroxide Crystals

Molecular insight into the initial hydration of tricalcium aluminate

Effect of polycarboxylate ether on the expansion of ye'elimite hydration in the presence of anhydrite

Study on rheological, adsorption and hydration properties of cement slurries incorporated with EPEG-based polycarboxylate superplasticizers