Abstract:The Peierls–Nabarro dislocation model is applied in this paper to investigate the [110] full dislocations on the (001), (111), and (1 ̄10) planes in pure Al, as well as the (110) small-angle tilting grain boundary (SATGB) composed of them. The findings demonstrate that the stress–strain fields of both dislocations and grain boundaries can be accurately described by a five-term single dislocation strain field. The Peierls stresses for the [110] edge-type dislocations on the (001), (111), and (1 ̄10) planes are 67.15 MPa, 114.93 MPa, and 847.56 MPa, respectively, exhibiting an increasing trend in magnitude. As the inter-dislocation distance decreases in the (110) SATGB of Al, the stress field, half-width, decomposition trend, and line energy of individual dislocations gradually decrease. The change in the line energy can be divided into three parts: Initially, there is a slow decrease when the distance is greater than ~200 Å. This is followed by a sharp drop in the line energy as the distance further decreases, with a slowing down of this trend at ~70 Å, where strain energy becomes dominant. In the final stage, the changes in the strained energy and core energy synergistically contribute. The (110) SATGB energy exhibits an increasing trend with the increment of the angle. The Peierls energy and force of the (110) SATGB composed of [110] full dislocations on the Al (001) and (111) surfaces exhibit minimal variation as the distance between dislocations changes, whereas a slight decrease is observed on the (110) surface. The present study provides valuable insights into the investigation of mechanical properties in Al alloys with nanometer-sized grains.

A criterion for slip transfer at grain boundaries in Al

Criteria for slip transfer across grain and twin boundaries in pure Ni

Assessment of slip transfer criteria for prismatic-to-prismatic slip in pure Ti from 3D grain boundary data

The effect of microstructure on the relationship between grain boundary sliding and slip transmission in high purity aluminum

Dislocations, Boundaries and Slip Systems in Cube Grains of Rolled Aluminium

Statistical analysis of slip transfer in Al alloy based on in-situ tensile test and high-throughput computing method

Analysis of slip transfer across grain boundaries in Ti via diffraction contrast tomography and high-resolution digital image correlation: When the geometrical criteria are not sufficient

On the effect of slip transfer at grain boundaries on the strength of FCC polycrystals

Grain Boundary Sliding along Special Asymmetric Grain Boundaries in the Al Bicrystals: Atomistic Molecular Dynamics Simulation

Grain Orientation Dependence of Extended Planar Dislocation Boundaries in Rolled Aluminium

The role of grain boundary plane in slip transfer during deformation of magnesium alloys

Influence of variation in grain boundary parameters on the evolution of atomic structure and properties of [111] tilt boundaries in Aluminum

In-situ Study of the Effect of Strain Path Change on Dislocation Boundary Evolution in Commercial Purity Aluminum

Effect of Copper Segregation at Low-Angle Grain Boundaries on the Mechanisms of Plastic Relaxation in Nanocrystalline Aluminum: An Atomistic Study

Atomistic Study of Grain-Boundary Segregation and Grain-Boundary Diffusion in Al-Mg Alloys

First-Principles Study of Physical Properties of (110) Symmetric Small-Angle Tilting Grain Boundary with Full Dislocation in Aluminum

Size effect in bi-crystalline micropillars with a penetrable high angle grain boundary

Computer Simulation of Effects of Mg Segregation on Properties of Al Grain Boundary

Aluminum depletion induced by complex co-segregation of carbon and boron in a Σ 5 [3 1 0] bcc-iron grain boundary

Molecular dynamics simulation of grain boundary geometry on crack propagation of bi-crystal aluminum

An atomistic investigation of the interaction of dislocations with Guinier-Preston zones in Al-Cu alloys