Abstract:The Peierls–Nabarro dislocation model is applied in this paper to investigate the [110] full dislocations on the (001), (111), and (1 ̄10) planes in pure Al, as well as the (110) small-angle tilting grain boundary (SATGB) composed of them. The findings demonstrate that the stress–strain fields of both dislocations and grain boundaries can be accurately described by a five-term single dislocation strain field. The Peierls stresses for the [110] edge-type dislocations on the (001), (111), and (1 ̄10) planes are 67.15 MPa, 114.93 MPa, and 847.56 MPa, respectively, exhibiting an increasing trend in magnitude. As the inter-dislocation distance decreases in the (110) SATGB of Al, the stress field, half-width, decomposition trend, and line energy of individual dislocations gradually decrease. The change in the line energy can be divided into three parts: Initially, there is a slow decrease when the distance is greater than ~200 Å. This is followed by a sharp drop in the line energy as the distance further decreases, with a slowing down of this trend at ~70 Å, where strain energy becomes dominant. In the final stage, the changes in the strained energy and core energy synergistically contribute. The (110) SATGB energy exhibits an increasing trend with the increment of the angle. The Peierls energy and force of the (110) SATGB composed of [110] full dislocations on the Al (001) and (111) surfaces exhibit minimal variation as the distance between dislocations changes, whereas a slight decrease is observed on the (110) surface. The present study provides valuable insights into the investigation of mechanical properties in Al alloys with nanometer-sized grains.

Dislocations, Boundaries and Slip Systems in Cube Grains of Rolled Aluminium

Grain Orientation Dependence of Extended Planar Dislocation Boundaries in Rolled Aluminium

A criterion for slip transfer at grain boundaries in Al

Grain Orientation Dependence of Extended Planar Dislocation Boundaries in Cold-Rolled Polycrystalline Aluminium

Atomistic Study of Fundamental Character and Motion of Dislocations in Intermetallic Al2Cu

Sliding behaviour and dislocation structures in aluminium grain boundaries

First-Principles Study of Physical Properties of (110) Symmetric Small-Angle Tilting Grain Boundary with Full Dislocation in Aluminum

The Interaction Mechanism of Screw Dislocations with Coherent Twin Boundaries in Different Face-Centred Cubic Metals

Energy of low angle grain boundaries based on continuum dislocation structure

Inclination-governed Deformation of Dislocation-Type Grain Boundaries

Orientation dependence of dislocation structure in surface grain of pure aluminium deformed in tension

The Grain Size and Orientation Dependence of Geometrically Necessary Dislocations in Polycrystalline Aluminum During Monotonic Deformation: Relationship to Mechanical Behavior

Dislocation content of grain boundary phase junctions and its relation to grain boundary excess properties

Interactions between edge lattice dislocations and Sigma 11 symmetrical tilt grain boundary: comparisons among several FCC metals and interatomic potentials

Resolving localized geometrically necessary dislocation densities in Al-Mg polycrystal via in situ EBSD

Evolutions of Grain Orientation and Dislocation Boundary in Aa1050 Aluminum Alloy During Cold Rolling from Low to Medium Strains

Dislocation Boundary Structure from Low to Medium Strain of Cold Rolling AA3104 Aluminum Alloy

In-situ Study of the Effect of Strain Path Change on Dislocation Boundary Evolution in Commercial Purity Aluminum

Effect of Cu and Mg co-segregation on the strength of the Al grain boundaries: A molecular dynamics simulation

Dislocation-mediated plasticity in the Al$_{2}$Cu θ-phase

Internal structures of deformation induced planar dislocation boundaries