Noise and spectral stability of deep-UV gas-filled fiber-based supercontinuum sources driven by ultrafast mid-IR pulses

Abubakar I. Adamu,Md. Selim Habib,J. Enrique Antonio Lopez,Peter Uhd Jepsen,Rodrigo Amezcua-Correa,Ole Bang,Christos Markos
DOI: https://doi.org/10.1038/s41598-020-61847-w
2019-09-05
Abstract:Deep-UV (DUV) supercontinuum (SC) sources based on gas-filled hollow-core fibers constitute perhaps the most viable solution towards ultrafast, compact, and tunable lasers in the UV spectral region. Noise and spectral stability of such broadband sources are key parameters that define their true potential and suitability towards real-world applications. In order to investigate the spectral stability and noise levels in these fiber-based DUV sources, we generate an SC spectrum that extends from 180 nm (through phase-matched dispersive waves - DWs) to 4 {\mu}m by pumping an argon-filled hollow-core anti-resonant fiber at a wavelength of 2.45 {\mu}m. We characterize the long-term stability of the source over several days and the pulse-to-pulse relative intensity (RIN) noise of the strongest DW at 275 nm. The results indicate no sign of spectral degradation over 110 hours, but the RIN of the DW pulses at 275 nm is found to be as high as 33.3%. Numerical simulations were carried out to investigate the spectral distribution of the RIN and the results confirm the experimental measurements and that the poor noise performance is due to the RIN of the pump laser, which was hitherto not considered in numerical modelling of these sources. The results presented herein provide an important step towards an understanding of the noise mechanism underlying such complex light-gas nonlinear interactions and demonstrate the need for pump laser stabilization.
Optics
What problem does this paper attempt to address?
The problem that this paper attempts to solve is the noise and spectral stability issues of deep - ultraviolet (DUV) supercontinuum (SC) light sources in gas - filled hollow - core fiber systems. Specifically, the research focuses on the stability of such broadband light sources during long - term operation and the relative intensity noise (RIN) between pulses, especially the noise characteristics of the discrete wave (DW) at 275 nm. ### Main problems: 1. **Noise level**: Researchers hope to explore the noise levels of these fiber - based DUV light sources through experiments and numerical simulations, especially the relative intensity noise (RIN) between pulses of the strongest discrete wave (DW) at 275 nm. 2. **Spectral stability**: Researchers are also concerned about the spectral stability of these light sources during long - term operation, that is, whether the spectrum will degrade or change. ### Background and motivation: - **Application requirements**: DUV supercontinuum light sources have important applications in the semiconductor industry (such as lithography and chip inspection), time - resolved spectroscopy, etc. These applications require light sources with high stability and low noise. - **Limitations of existing technologies**: Traditional solid - core fibers have very high losses in the DUV region and are therefore not suitable for DUV light sources. Gas - filled hollow - core anti - resonant fibers (HC - ARF), on the other hand, are considered one of the most promising technologies for realizing DUV supercontinuum light sources due to their low - loss and broadband transmission characteristics. - **Importance of the noise problem**: Although many studies have shown that such light sources have high stability, the noise problem remains a key challenge in practical applications. Previous numerical simulations usually did not consider the noise of the pump laser, which may lead to an overestimation of the light source performance. ### Research methods: - **Experimental part**: Using HC - ARF fibers filled with argon gas, supercontinuum spectra covering 180 nm to 4 μm were generated by pumping with 2.45 μm ultrafast mid - infrared pulses. Researchers monitored the total output power and spectral changes of the light source within 110 hours and measured the relative intensity noise (RIN) between pulses of the discrete wave at 275 nm. - **Numerical simulation**: Through numerical simulation, researchers considered quantum noise and fluctuations of the actual pump laser, verified the experimental results, and analyzed the sources of noise. ### Main findings: - **Spectral stability**: The experimental results show that within 110 hours, the total output power and spectrum of the light source have no obvious attenuation, indicating that the light source has good long - term stability. - **Noise level**: The relative intensity noise (RIN) between pulses of the discrete wave at 275 nm is as high as 33.3%, much higher than the predicted values in previous studies. Numerical simulations show that this high noise mainly comes from the relative intensity noise (RIN) of the pump laser, not quantum noise. ### Conclusions: - **Influence of the pump laser**: The research results emphasize the important influence of the pump laser noise on the performance of DUV supercontinuum light sources. In order to realize a low - noise DUV light source, it is necessary to use a low - noise pump laser and may require further laser stabilization techniques. - **Future directions**: This research provides an important step in understanding the noise mechanisms in such complex nonlinear interactions and lays the foundation for further optimizing the design and application of DUV supercontinuum light sources.