Abstract:Studying the true triaxial deformation characteristics and progressive damage behavior of sandstone is of great significance for the stability control of roadways. Both the conventional triaxial test (CTT) and the true triaxial compression test (TTT) were conducted for sandstone to investigate its deformation characteristics and the variation laws of volume strain during the progressive damage process under different confining pressures. The conducted experiments showed that both the axial and lateral strains of the rock prior to failure under CTT conditions increased with increasing confining pressure. However, with increasing intermediate principal stress (σ2) under TTT conditions, both the axial strain, and the lateral strain (ε2) gradually decreased, and the lateral strain (ε3, expansion) first slow down and then accelerated. Moreover, the anisotropic characteristics first gradually weakened and then enhanced. The variation of the volume strain increment and the volume strain rate of rock combined with the acoustic emission activity and a three-dimensional rock theoretical model with microcrack defects were analyzed in detail. During the stable crack growth stage III, the volume strain increment and volume strain rate increased with increasing confining pressure under CTT conditions, while they decrease after the initial increase with increasing σ2 under TTT conditions. During the unstable crack growth stage IV, the volume strain increment increased sharply, while the volume strain rate gradually slowed down with increasing confining pressure under CTT conditions. The internal cracks of the rock were gradually suppressed and the lateral expansion was gradually constrained. The volume strain increment first increased followed by a decrease, and the volume strain rate gradually slowed down after a noticeable acceleration with increasing σ2 under TTT conditions. The internal micro-cracks gradually evolved from inhibition (in the planes parallel to plane 1–2 and plane 2–3) to accelerated expansion (the planes along the σ2 direction), and the lateral deformation first weakened and then strengthened.

Grain Deformation of Fractured Sandstone and Stokes Local-rotation of Material Line

Numerical Simulations of Granular Material Behavior under Rotation of Principal Stresses: Micromechanical Observation and Energy Consideration

Microscale deformation behavior of sandstone mineral particles based on XCT scanning

Historical shear deformation of rock fractures derived from quantitative three-dimensional description of fracture surfaces on digital outcrop models (DOMs)

Grain Rotation In Plastic Deformation

Study on the progressive fracturing in soil and rock mixture under uniaxial compression conditions by CT scanning

Assessing continuum plasticity postulates with grain stress and local strain measurements in triaxially compressed sand

Strength, deformation, and failure characteristics of hollow cylinder sandstone under axial–torsional tests

The evolution of geometry and flow characteristics of fracture inside tight sandstone under stress

Grayscale evolution characterization of the strain field and precursor identification in sandstone containing multiple flaws after freeze–thaw treatment

Grain-scale failure mechanism of porous sandstone: An experimental and numerical FDEM study of the Brazilian Tensile Strength test using CT-Scan microstructure

Multiscale Damage Analyses of Red Sandstone in Uniaxial Compression Based on Advanced Digital Volume Correlation

Experimental investigation on True Triaxial Deformation and Progressive Damage Behaviour of Sandstone

Fracturing behavior and damage model of spatial-rotation fissured sandstone: An experimental study on freeze–thaw and fatigue loads coupling

Fracture behavior of cylindrical sandstone specimens with two pre-existing flaws: experimental investigation and PFC3D simulation

A Comparative Study of Natural and Experimental Nano-Sized Grinding Grain Textures in Rocks

Quantitative description of fracture behavior and mechanical anisotropy of fractured rock mass: Sand 3D printing and DIC explorations

Long-term creep and microscopic deformation mechanisms of sandstone using rock rheology creep equipment and scanning through high-resolution 3D XRM

Dynamic Mechanical and Fracture Behaviour of Sandstone Under Multiaxial Loads Using a Triaxial Hopkinson Bar

Grain rotation mechanisms in nanocrystalline materials: Multiscale observations in Pt thin films

Nonlinear Mechanical and 3D Rupture Morphology of Saturated Porous Sandstone Under True Triaxial Stress