Abstract:The load carrying capacity of a bridge needs to be properly assessed to operate the bridge safely and maintain it efficiently. For the evaluation of load carrying capacity considering the current state of a bridge, static and quasi-static loading tests with weight-controlled heavy trucks have been conventionally utilized. In these tests, the deflection (or strain) of the structural members loaded by the controlled vehicles are measured and analyzed. Using the measured data, deflection (or strain) correction factor and impact correction factor are calculated. These correction factors are used in the enhancement of the load carrying capacity of a bridge, reflecting the real state of a bridge. However, full or partial control of the traffic during the tests and difficulties during the installment of displacement transducers or strain gauges may cause not only inconvenience to the traffic but also the increase of the logistics cost and time. To overcome these difficulties, an alternative method is proposed using an excited response part of full measured ambient acceleration data by ordinary traffic on a bridge without traffic control. Based on the modal properties extracted from the ambient vibration data, the initial finite element (FE) model of a bridge can be updated to represent the current real state of a bridge. Using the updated FE model, the deflection of a bridge akin to the real value can be easily obtained without measuring the real deflection. Impact factors are obtained from pseudo-deflection, which is obtained by double-integration of the acceleration data with removal of the linear components on the acceleration data. For validation, a series of tests were carried out on a steel plate-girder bridge of an expressway in Korea in four different seasons, and the evaluated load carrying capacities of the bridge by the proposed method are compared with the result obtained by the conventional load test method.

Comparative Analysis and Evaluation of Two Prestressed Girder Bridges

Experimental Study and Numerical Analysis of A Composite Bridge Structure

Fatigue Performance Assessment of Composite Arch Bridge Suspenders Based on Actual Vehicle Loads

Comparison and Analysis of Models of 3D Calculation of Skew-beam Bridges

Comparative Study on the Methods for Analyzing Transverse Intemal Force of Prestressed Concrete Box Girder Bridge

Simulation Analysis of Girder Transport Process on the Box Girder of Hangzhou Bay Bridge

Approach for Analyzing the Ultimate Strength of Concrete Filled Steel Tubular Arch Bridges with Stiffening Girder

Analysis and Comparison on Wind Load of Long Span Girder Bridges with High Pier

Mechanical Behavior of Box Girder Bridge with Partial Corrugated Steel Webs

Analysis of Ultimate Loading Capacity of the Prestressed Concrete Curved Bridge

Analysis of Prestressed Concrete Bridge with Virtual Laminated Element Method

Influence analysis of group studs stiffness in accelerated construction steel-concrete composite small box girder bridges

Behaviour Analysis of Prestressed Concrete Deck-Tied Arch Bridge

SCHEME COMPARATION OF STRENGTHENING CONTINUOUS PRESTRESSED CONCRETE BOX GIRDER BRIDGE BY EXTERNAL PRESTRESSED CABLE

Reinforcement Analysis of an Old Multi-Beam Box Girder Based on a New Embedded Steel Plate (ESP) Strengthening Method

Flexural Performance of Prefabricated Composite Girders along with Precast Deck-to-Girder Continuous Connections

Advantage Analysis of Composite Girder with Corrugated Steel Web Compared with Concrete Girder in Continuous Rigid Frame Bridge

Bridge Widening with Composite Steel-Concrete Girders: Application and Analysis of Live Load Distribution

Theoretical and computational simulation of the effect of the number of intermediate diaphragms on the live load distribution factors and structural response of a precast girder bridge

Structural Performance Evaluation of A Steel-Plate Girder Bridge Using Ambient Acceleration Measurements

Computation Model and Experimental Study on Skew Prestressed Concrete Plate Beam Bridge