Abstract:The ultra-wideband (UWB) has recently been recognized as a revived wireless technology for short-range communication and fine ranging [1]–[3]. Even though the coherent UWB receiver achieves good sensitivity and high immunity against the narrowband interference (NBI), it suffers from high power and complex design for receiver synchronization. With a simple architecture and intermittent operation, the noncoherent UWB receiver achieves high energy efficiency [3], but the performance is vulnerable to the NBI. Because of new wireless standards such as 5G NR and Wi-Fi 6, having good NBI tolerance at 5-6GHz range becomes critical for UWB transceiver systems. The NBI tolerance of only -45dBm at 6GHz is reported in a recent noncoherent transceiver [4]. In this paper, we propose a 7.25-7.75GHz UWB transceiver that achieves good NBI tolerance as well as fine ranging with following features. Firstly, the uncertain-IF architecture is employed for the UWB receiver for the first time to achieve an optimum performance between energy efficiency and NBI tolerance. Unlike the uncertain-IF wake-up receiver (WuRX) for narrowband wireless standards [5], the quality (Q) factor requirement and the design complexity for the RF filter or IF filter could be significantly relaxed. To have good image rejection, a high LO frequency of 9GHz is chosen for down conversion, so that the image frequency can be beyond 10GHz. Secondly, the transceiver employs the synchronized on-off keying (S-OOK) modulation to mitigate the baseband synchronization issue [6]. Based on the S-OOK modulation, a pulse-triggered envelope/energy detector (PT-EVED) is designed in the receiver not only to automatically define an optimum integration window for good sensitivity during the communication mode but also to provide a fine ranging resolution during the ranging mode. Thirdly, a ΔΣ time-to-digital converter (TDC) is employed to have a digital-intensive ranging demodulation with a 1b oversampled output.

An IEEE 802.15.4/4z Coherent Quadrature Hybrid Correlation UWB Receiver in 65-nm CMOS

A 17.3mW IEEE 802.15.4/4z Coherent Quadrature Hybrid Correlation UWB Receiver in 65nm CMOS

A 65-Nm Sub-10-mW Communication/Ranging Quadrature Uncertain-IF IR-UWB Transceiver with Twin-OOK Modulation

A Quadrature Uncertain-IF IR-UWB Transceiver with Twin-OOK Modulation.

Low-Power Low-Complexity FM-UWB Hybrid Transceiver for Communication and Ranging

0.15-Nj/b 3–5-Ghz IR-UWB System with Spectrum Tunable Transmitter and Merged-Correlator Noncoherent Receiver

A Low Power 35 Ghz Cmos Uwb Receiver Front-End

A 7.25-7.75Ghz 5.9mw UWB Transceiver with -23.8Dbm NBI Tolerance and 1.5cm Ranging Accuracy Using Uncertain IF and Pulse-Triggered Envelope/Energy Detection.

Quasi-adaptive Frequency Synchronous Method for IR-UWB System

A Low Power 3–5 GHz CMOS UWB Receiver Front-End

A high efficiency robust IR-UWB receiver design for high data rate CM-range communications

A 28-/60-GHz Dual-Band Receiver Front-End With Sideband-Selection Technique in 65-nm CMOS

A 7.5-Ghz Frequency-Hopping CDMA UWB Transceiver for Secure Multi-Sensor Connectivity

A 3.1–4.8 GHz CMOS receiver for MB-OFDM UWB

A 6-7 GHz, 40 Db Receiver RF Front-End with 4.5 Db Minimum Noise Figure in 0.13μm CMOS for IR-UWB Applications

5.1 A 5-to-16ghz Reconfigurable Quadrature Receiver with 50% Duty-Cycle LO and IQ-Leakage Suppression

A non-coherent receiving solution for near field pulse UWB communication

A low-power 4.224GS/s sampler in 0.13-μm CMOS for IR UWB receiver

78.8 pJ/b, 100 Mb/s Noncoherent IR-UWB Receiver for Multichannel Neurorecording Implants

A 0.13&#x03bc;m CMOS UWB Receiver Front-End Using Passive Mixer

A 4 Ghz Quadrature Output Fractional-N Frequency Synthesizer for an Ir-Uwb Transceiver