Abstract:A new method was evaluated and developed for the analysis of pesticides in sandy-loam soil by direct-immersion solid phase microextraction (DI-SPME) followed by gas chromatography tandem-mass spectrometry (GC-MS/MS) determination. Ten pesticides were selected based on a literature survey of the compounds reported to be present in EU soils. The extraction was performed using SPME LC-Tips, a new SPME configuration with the coated fibers attached to a disposable and easy-to-handle micropipette tip, which was immersed into a soil slurry made by the addition of an aqueous solution to the soil sample. Ten experimental parameters were evaluated with a Plackett-Burman design, after which the extraction time and percentage of organic solvent in the aqueous extraction were optimized separately. The two fiber chemistries available (PDMS/DVB and C 18 ) were evaluated in parallel for the entire work. In the final method, slurry samples were made by adding an aqueous solution (6% methanol v/v) to 2 g of soil. The fiber was conditioned and then inserted, for extraction, into the samples, stirred by a magnetic bar. Afterwards, the analytes were desorbed onto 100 μ L of methanol. After the addition of analyte protectants (ethylglycerol, gulonolactone, and sorbitol) the extract was injected into the GC-MS/MS system. Isotopically labelled penconazole was used as internal standard. A calibration was performed by extracting spiked soil with analyte concentrations of 0.1-50 μg/kg. Coefficients of determination of the linear calibration were between 0.94-0.98 for the PDMS/DVB and 0.92-0.99 for the C 18 . Limits of detection range between 0.01-10 μg/kg for the PDMS/DVB and 0.1-10 μg/kg for the C 18 . Overall, the C 18 analytically outperformed the PDMS/DVB but required a longer extraction time (120 min vs 75 min for the PDMS/DVB). This method allows automation and generates low residual toxic waste, having the potential to be introduced as a greener and simpler alternative to currently used sample preparation methodologies.

Non-destructive, solvent-free quantification of wood preservatives in wood flour and wooden objects using GC-DTIMS

Determination of Organochlorine Pesticide Residues in Wood Preservatives and Treated Timber by GC-ECD

Direct Analysis in Real Time Coupled with Quadrupole-Orbitrap High-Resolution Mass Spectrometry for Rapid Analysis of Pyrethroid Preservatives in Wooden Food Contact Materials

Detection of Fungicides in Food Contact Paper and Wood Products

Optimization of Electrospray Ionization for Liquid Chromatography Time-of-Flight Mass Spectrometry Analysis of Preservatives in Wood Leachate Matrix

Wood modification with N-methylol and N-methyl compounds: a case study on how non-fixated chemicals in modified wood may affect the classification of their durability

Determination of Organotin Compounds in Timber and Wood Products by Gc-Ms

Simultaneous Determination of Fungicides in Wood and Bamboo Food-Contact Materials by High-Performance Liquid Chromatography–Tandem Mass Spectrometry (HPLC–MS/MS)

Direct sample introduction GC-MS/MS for quantification of organic chemicals in mammalian tissues and blood extracted with polymers without clean-up

Extraction of pesticides from soil using direct-immersion SPME LC-Tips followed by GC-MS/MS: Evaluation and proof-of-concept

Direct detection of dithiocarbamate fungicides by SALDI/MS using porous TiC ceramic powder as a substrate

Volatile Carbonyl Compounds Emission in Dry-Process Fibreboard: Identification through a Selective GDME-HPLC-DAD-MS/MS Method

Application of near-infrared spectroscopy for the fast detection and sorting of wood–plastic composites and waste wood treated with wood preservatives

Simultaneous Determination of Trihalomethane and Typical Nitrogenous-Dbps Using Automated Spme Coupled Gc-Ms and the Impact of Preservation Condition on the Analysis

Comprehensive chemical characterization of indoor dust by target, suspect screening and nontarget analysis using LC-HRMS and GC-HRMS

Simultaneous detection of monomers associated with resin-based dental composites using SPME and HPLC

An analytical multi-residue approach for the determination of semi-volatile organic pollutants in pine needles

Novel multiple extraction thermal desorption approach prior to gas chromatography for the determination of residual solvents applied to modified cellulose

Simultaneous analysis of pesticides from different chemical classes by using a derivatisation step and gas chromatography-mass spectrometry

Method Development for Directly Screening Pesticide Residues in Foodstuffs Using Ambient Microfabricated Glow Discharge Plasma (MFGDP) Desorption/ionization Mass Spectrometry