Abstract:The ebullated bed residual oil hydrocracking is a well-established technology wherein the vacuum residue (VR) of crude oil is converted into light valuable oils. This research work targeted to optimize the hydrocracking process by integrating the pump-free ebullated bed reactor (PF-EBR) with a membrane-based gas synthetic recovery system. A PF-EBR hydrocracking unit with a feed capacity of 3 x 10(6) t/a (ton per annum) of vacuum residues was modeled by the axial dispersion model; the 5-lump axial dispersion model and the finite difference model for PF-EBR and membrane unit were developed and packaged as self-defined extensions in Aspen HYSYS, allowing the integrated process to be evaluated in high efficiency and accuracy; the proposed model was further validated by the experimental data of the pilot and 5 x 10(4) t/a industrial unit. The results of process optimizations showed that the membrane-aided separation system demonstrated better performance than the conventional condensation system in separating hydrogen and hydrocarbons from bulk refinery gas. The recovery of hydrogen from the reactor effluent resulted in 30.0% drop in reactor fresh makeup hydrogen cost; the membrane-based system separated the light hydrocarbons from refinery flash gases, which boosted the net profit of hydrocarbon recovery by 80%, leading to $122.3 x 10(6)/a increase in the total product sale (about 7% of the hydrocracker total sale). This study bridged the gap between theoretical models and industrial PF-EBR processes and provided a designing framework for the integrate process of PF-EBR VR hydrocracking and gas synthetic recovery system. The described improvements implied significant reductions in energy cost, carbon footprint, and operational cost; the estimated reduction in CO2 emissions is around 2.6 x 10(4) t/a; all are attributed to the thorough gas recovery.

Core-shell equivalent reactor network model to bridging CFD and process simulations of a fluidized bed reactor

Flow Distribution in a Novel Fixed Bed Bionic Reactor

Steady-state Simulation of Core-Annulus Flow in a Circulating Fluidized Bed (CFB) Riser

Novel Integrated Reactor-Regenerator Model for the Fluidized Catalytic Cracking Unit Based on an Equivalent Reactor Network

Chemical reactor network modeling in the context of solid fuel combustion under oxy-fuel atmospheres

Multi-zone Parallel-Series Plug Flow Reactor Model with Catalyst Deactivation Effect for Continuous Catalytic Reforming Process

Pore network modelling of slender packed bed reactors

Reaction-diffusion model to quantify and visualize mass transfer and deactivation within core-shell polymeric microreactors

A Two-Phase CFD Modeling Approach to Investigate the Flow Characteristics in Radial Flow Moving-Bed Reactors

Discussion on the influence of internal components on the flow field distribution of a new gas–solid non-catalytic fluidized bed (NRFB)

Computational fluid dynamics analysis of char conversion in Sandia's pressurized entrained flow reactor

Comparison of Cfd Simulation and Simplified Modeling of A Fluidized Bed Co2 Capture Reactor

CFD Simulation with Detailed Chemistry of Steam Reforming of Methane for Hydrogen Production in an Integrated Micro-Reactor

Enhanced Modeling of Back-Mixing in Chemical Reactor Networks

Modeling the hydrodynamics in a coupled high-density downer-to-riser reactor

CFD Modeling of the Gas–solid Two-Fluid Flow in Polyethylene FBRs: from Traditional Operation to Super-Condensed Mode

Development of a multiphase chemical reactor network method as a tool for simulating biomass gasification in fluidized beds

3D virtual full-loop CFD simulation of industrial two-stage FCC reaction–regeneration system

Computational fluid dynamic modeling of hydrodynamics in downer reactors

Optimization of Residual Oil Hydrocrackers: Integration of Pump-Free Ebullated Bed Process with Membrane-Aided Gas Recovery System

Evaluation of the effect of pressure and heat transfer on the efficiency of a batch fuel reactor, using Iron-based Oxygen Carrier with a CFD model