Abstract:Different micro-regions of weldment are expected to present various cyclic softening behaviours during creep-fatigue interaction (CFI), which has a significant influence on the remaining mechanical properties. The present work aims to investigate the cyclic softening and remaining creep behaviour of different micro-regions of P92 steel weldment using electron backscattered diffraction (EBSD) and nanoindentation technology. CFI tests were performed and interrupted at various pre-set fatigue cycles at elevated temperature of 650 degrees C and hold time of 180 s, and thereafter EBSD analyses, nanoindentation tests and high-temperature creep tests were conducted on these interrupted specimens. Experimental results reveal that the microstructure of the parent metal and fine austenite grain heat-affected zone, which is adjacent to the intercritical heat affected zone, are sensitive to CFI loading. Notably, the microstructural evolution in intercritical heat affected zone almost reaches saturated after fatigue cycles of 20%Nf. Nanoindentation results uncover that the intercritical heat affected zone exhibits the lowest elastic modulus and micro hardness, and with increasing the number of fatigue cycles, the weakest region changes. Accordingly, creep fracture location transits and creep life was degraded. Finally, a fatigue damage parameter based on the microhardness was developed to capture the effects of CFI on remaining creep life. (c) 2021 Published by Elsevier B.V. This is an open access article under the CC BY-NC-ND license (http://creativecommons.org/licenses/by-nc-nd/4.0/).

Internal stresses analysis on welded joint in Grade 91 steel under creep test: synchrotron DRX tests and modelling

Research on Multiaxial Creep Properties of P92 Steel Based on Improved KR Creep Constitutive Model

Creep behavior analysis on ruptured welds of heat-resistant steels with two different failure modes

Characterization of the Cyclic Softening and Remaining Creep Behaviour of P92 Steel Weldment

Low Cycle Fatigue and Creep Fatigue Interaction Behavior of 9Cr-0.5Mo-1.8w-v-nb Heat-Resistant Steel at High Temperature

Remaining creep properties and fracture behaviour of P92 steel welded joint under prior low cycle fatigue loading

The correlation between prior fatigue damage and remaining creep properties in a high chromium steel welded joint

An Insight into the Creep-Fatigue Damage Localization in Welded Joints Based on Crystal Plasticity Finite Element Method

Assessment of creep rupture properties for dissimilar steels welded joints between T92 and HR3C: CREEP PROPERTIES OF T92/HR3C WELDED JOINTS

Creep Rupture Behavior of 2.25cr1mo0.25v Steel and Weld for Hydrogenation Reactors under Different Stress Levels

Insight into the creep-fatigue interaction and remaining creep damage mechanisms in different micro-regions of 9%Cr steel welded joints

The Relative Significance of Internal Damage Mechanisms on the Overall Creep Damage and Ultimate Failure of P91 Steel

Experimental and Numerical Characterization of Low Cycle Fatigue and Creep Fatigue Behaviour of P92 Steel Welded Joint

Mechanisms for Creep Rupture of 12cr/alloy 4715 Dissimilar Weldments

Numerical simulation on interfacial creep failure of dissimilar metal welded joint between HR3C and T91 heat-resistant steel

Analytical Model to Compare and Select Creep Constitutive Equation for Stress Relief Investigation during Heat Treatment in Ferritic Welded Structure

The development of creep damage constitutive equations for high Cr steel

Creep behavior and in-depth microstructural characterization of dissimilar joints

Creep Performance Study of Inconel 740H Weldment Based on Microstructural Deformation Mechanisms

Creep Rupture Behavior in Dissimilar Weldment Between FB2 and 30cr1mo1v Heat-Resistant Steel

Combined crystal plasticity and grain boundary modeling of creep in ferritic-martensitic steels: I. Theory and implementation