Abstract:The chemical and structural complexity of lithium-ion battery electrodes and their constituting materials requires comprehensive characterization techniques to reveal degradation phenomena at the mesoscale. For the first time, application of single-particle inductively coupled plasma-optical emission spectroscopy enables the investigation of the chemomechanical interplay on the particle level of lithium transition-metal oxide [e.g., Li(Ni1/3Co1/3Mn1/3)O2] cathode materials. The sample-inherent polydisperse size distribution of particles ranging up to 10 μm was effectively restricted with the use of a custom-made gravitational-counter-flow classifier to facilitate complete particle vaporization and excitation. After classification, the particles were transported directly to the plasma by means of an argon flow to prevent chemical alterations in aqueous media due to potentially occurring Li+-H+ exchange reactions. The size-separated particles were monitored online by flow cell particle analysis (FPA). The influence of different gas flow settings and plasma parameters on the peak emission intensity of Li and Mn was evaluated. A particle size detection limit of ∼0.5 μm was estimated based on the 3σ criterion of the baselines and the measured peak intensities for Li and Mn considering the particle size distribution as obtained by FPA. The corresponding analyte masses at the detection limits were ∼30 and ∼180 fg for Li and Mn, respectively. Furthermore, an approach for a matrix-matched external calibration with electrochemically delithiated lithium transition-metal oxides is presented.

Analysis of nickel-niobium alloys by inductively coupled plasma optical emission spectrometry

Determination of Ni,Al,P,Mg and Ca in Nickel Ores by Inductively Coupled Plasma-Atomic Emission Spectrometry

Determination of Trace Phosphorus in Cobalt-Niobium-zirconium Alloy by Inductively Coupled Plasma Atomic Emission Spectrometry

High Resolution Analysis of Elemental Partitioning in Nickel-Base Superalloy Welds Using Atom Probe Field Ion Microscopy

The importance of the pretreatment of samples in Nd quantification from NdFeB magnets through inductively coupled plasma atomic emission spectroscopy (ICP-OES)-a rapid and streamlined methodology

Development of the method for quantitative determination of impurities content in heat-resistant welded nickel alloys using the atomic-emission spectrometry with inductively coupled plasma

Characterization of stability of ceramic suspension for slurry introduction in inductively coupled plasma optical emission spectrometry and application to aluminium nitride analysis

Study of Aluminothermic Reduction Conditions With Plasma Ignition

Characterization of Nonmetallic Inclusions in Low‐Alloyed Steels Using Pulse Distribution Analysis Optical Emission Spectroscopy and Offline Investigation Methods

Quantitative analysis of niobium in electropolishing solution by laser-induced breakdown spectroscopy using porous silicon

Elemental analysis of nickel ore by PGNAA

Single-Particle Elemental Analysis of μm-Sized Battery Materials by Laser Ablation Inductively Coupled Plasma Mass Spectrometry

Determination of niobium in rocks, ores and alloys by atomic-absorption spectrophotometry

X-ray spectral microanalysis of W-Ni-Fe pseudoalloy obtained from electroerosive powders

Niobium in the Environment and a New Method for its Trace Analysis Using Molecular or Atomic Absorption Spectrometry

Simultaneous determination of 5 elements in chrome iron ore samples by inductively coupled plasma-opti-cal emission spectrometry

Determination of impurities in titanium nitride by slurry introduction axial viewed inductively coupled plasma optical emission spectrometry

Determination of lithium and transition metals in Li1 Ni1/3 Co1/3 Mn1/3 O2 (NCM) cathode material for lithium-ion batteries by capillary electrophoresis

Direct Multielement Analysis of Polydisperse Microparticles by Classification-Single-Particle ICP-OES in the Field of Lithium-Ion Battery Electrode Materials

A Simple Method to Determine Low Metal Concentrations in Naphtha by Inductively Coupled Plasma Optical Emission Spectrometry (ICP-OES)