Abstract:Recently, it has been discovered that carba-closo-dodecaborates can be used as cation exchangers in neutral carrier-based ion-selective chemical sensors. Because of their inherent chemical stability and versatile functionalization chemistries, they offer many advantages that may potentially be exploited for ion analyses that require nontraditional sample conditions, including strongly acidic media. In this work, trimethylammonium salts of undecachlorinated (UCC), undecabrominated (UBC), hexabrominated (HBC), and undecaiodinated (UIC) carborane anions were prepared and evaluated for their potential use in solvent polymeric membrane-based sensors. Computational methods including Natural population analysis and electrostatic mapping were used to predict the ion-exchanging ability of each lipophilic anion. In addition, the sandwich membrane technique was used to evaluate the ion-pairing ability of each carborane anion in situ (i.e., within bis(2-ethylhexyl) sebacate (DOS)- and 2-nitrophenyl octyl ether (o-NPOE)-plasticized ISE membranes). The results of the computational and potentiometric studies found that binding affinity of the anions followed the generalized trend HBC > UCC > UBC > UIC. PVC-DOS bulk optode thin films containing the chromoionophore ETH 5315 and a respective anion were used to determine the chemical stability/lipophilicity of the carboranes and tetrakis[3,5-bis(trifluoromethyl)phenyl] borate (TFPB) in acidic media (0.2 M HOAc) under flowing conditions. The studies found that in terms of stability/lipophilicity UIC > UBC > TFPB approximately UCC >> HBC. Electrodes containing a Pb(2+)-selective ionophore, tert-butylcalix[4]arene-tetrakis(N,N-dimethylthioacetamide)(lead IV), were used to evaluate the functionality of each cation exchanger. An evaluation of response characteristics such as slope and selectivity found that UIC and UBC were quite comparable to the behavior of TFPB. Interestingly, both UIC and UBC showed a marked selectivity improvement over cadmium, with log K(pot)(pb),(Cd) values of -7.19 and -7.29, respectively, with TFPB giving a value of -5.89. Demonstrating excellent stability and suitable electrostatic properties, the carboranes, UIC in particular, are a very promising alternative to the tetraphenylborates and should find widespread application in the field of chemical sensors.

PVC ion-selective electrodes based on calcium bis-[dialkyl- and di-(4-alkylphenyl) phosphates] and mixed solvent mediators

Evaluation of calcium ion-selective electrodes based on di(n-alkylphenyl)-phosphate sensors and their calibration with ion buffers

PVC Membrane Lithium-Selective Electrodes Based on Oligomethylene-Bridged Bis-1,10-phenanthroline Derivatives

All-Solid-State Carbonate-Selective Electrode Based on Screen-Printed Carbon Paste Electrode

Potentiometric response of ion-selective membranes with ionic liquids as ion-exchanger and plasticizer

All-solid-state blood calcium sensors based on screen-printed poly(3,4-ethylenedioxythiophene) as the solid contact

A Miniature All-Solid-State Calcium Electrode Applied to in Situ Seawater Measurement

A Highly Selective Nitrite Sensitive PVC Membrane Electrode Using Lipophilic Phthalocyanine Cobalt(III) Complex As the Carrier

A Polymer Membrane Electrode Based on A Zinc(Ii) Schiff Base Complex for the Selective Determination of Sodium Benzoate

A copolymerized dodecacarborane anion as covalently attached cation exchanger in ion-selective sensors.

Mercury Ion Selective Light Addressable Potentiometric Sensor Based on PVC Membrane

Evaluation of the Separate Equilibrium Processes That Dictate the Upper Detection Limit of Neutral Ionophore-Based Potentiometric Sensors.

Ion-pairing Ability, Chemical Stability, and Selectivity Behavior of Halogenated Dodecacarborane Cation Exchangers in Neutral Carrier-Based Ion-Selective Electrodes.

Direct Potentiometric Bicarbonate/carbon Dioxide Sensing Based on Polymeric Membranes Doped with Selective Meso-Bisubstituted Calix[4]pyrrole Ionophores.

All-solid-state sodium-selective electrode based on a calixarene ionophore in a poly(vinyl chloride) membrane with a polypyrrole solid contact

Synthesis and Property of Polycrown Ethers (vi) - Sodium, Potassium and Cesium Ion Selective Pvc Membrane Electrodes Based on Bisphenol A Type Polycrown Ethers

Quantification of the concentration of ionic impurities in polymeric sensing membranes with the segmented sandwich technique.

Bis-crown ether containing pyrimidine ring: V . Sodium, potassium and caesium ion selective PVC membrane electrodes based on bis-crown ethers as carrier

The Influence of the Conditioning Procedure on Potentiometric Characteristics of Solid Contact Calcium-Selective Electrodes in Nanomolar Concentration Solutions

Determination of Complex Formation Constants of 18 Neutral Alkali and Alkaline Earth Metal Ionophores in Poly(vinyl Chloride) Sensing Membranes Plasticized with Bis(2-Ethylhexyl)sebacate and O-Nitrophenyloctylether

Mercury(II)-selective polymeric membrane electrode based on the 3-[4-(dimethylamino)phenyl]-5-mercapto-1,5-diphenylpentanone