Abstract:Silver ion (Ag + ) is of harmful effects to both environment and human health. Ag + soluble compounds and salts is used in treating mental illness, epilepsy, nicotine addiction, gastroenteritis, and infectious diseases, including syphilis and gonorrhea, and as anti-infective dermatological agent for controlling nose bleeding. However, high Ag + doses cause several harmful effects to human health such as irreversible pigmentation of skin and eye, and problems to liver and kidney. A bulk membrane Optode is proposed in this work to measure the Ag + concentration in the pharmaceutical formulations. The membrane optode is prepared from the ionophore 4-nitobenzo-15-crown-5, the ion-exchanger sodium tetrakis (imidazolyl) borate, the plasticizer o-nitrophenyl octyl ether, and the chromoionophore ETH 5294; these components are dissolved in the PVC/THF slurry to form the membrane. The optode is studied by atomic force microscope and UV–visible spectrophotometer, and its spectrum exhibits two maximum wavelengths of 550 and 665 nm, and response for Ag + at these maximum wavelengths is reproducible in the concentration range of 10 –11 to 10 –8 M using acetate buffer of pH 5.0, with very low detection limit of 8.8 × 10 –12 M. The most important feature in this work is the selectivity improvement for Ag + over all interfering ions; the selectivity coefficient logarithm is found to be − 4.3 for Cu 2+ , − 5.6 for Ni 2+ and − 5.0 for Cd 2+ . The response mechanism is studied by FTIR, and it depends on ion-exchange of Ag + and sodium imidazolyl borate, followed by the host–guest complexation between Ag + and the crown ionophore, which is accompanied by concomitant deprotonation of the chromoionphore. The optode has a response time of 2–3 min within lifetime of 10 days with the same response. The optode can be applied successfully for Ag + determination in the pharmaceutical formulation, PinkEye Relief ® eye drop, which is used for treating inflammation, redness and water discharge of the eye; the high recovery and low standard deviation of the results using calibration curve method confirm the accuracy and precision of the proposed optode for its application in real samples.

A Polymer Membrane Electrode Based on A Zinc(Ii) Schiff Base Complex for the Selective Determination of Sodium Benzoate

All-Solid-State Carbonate-Selective Electrode Based on Screen-Printed Carbon Paste Electrode

A Dibutyl Phthalate Sensor Based on a Nanofiber Polyaniline Coated Quartz Crystal Monitor

Solid-contact Ion-Selective Electrodes for Potentiometric Determination of Phenylethylamine in Vitro

Utilization of a novel PVC- optical sensor for high sensitive and selective determination of zinc ion in real samples

Development of a Highly Selective Chloride Ion Potentiometric Sensor Utilizing a Novel N, N-Ethylene-bis-(Salicylideneaminato) Zinc (II) Molecule for Clean Environment

Determination of Complex Formation Constants of 18 Neutral Alkali and Alkaline Earth Metal Ionophores in Poly(vinyl Chloride) Sensing Membranes Plasticized with Bis(2-Ethylhexyl)sebacate and O-Nitrophenyloctylether

PVC membrane bulk optode incorporating 4-nitrobenzo-15-crown-5 and sodium tetrakis(1-imidazolyl) borate for the pico-molar determination of silver ion in pharmaceutical formulation

An All-Solid-State Ammonium Ion-Selective Electrode Based on Polyaniline As Transducer and Poly (O-Phenylenediamine) As Sensitive Membrane

Direct Potentiometric Bicarbonate/carbon Dioxide Sensing Based on Polymeric Membranes Doped with Selective Meso-Bisubstituted Calix[4]pyrrole Ionophores.

Quantification of the concentration of ionic impurities in polymeric sensing membranes with the segmented sandwich technique.

A Novel Ph Sensing Membrane Based on an Ionic Liquid-Polymer Composite

Evaluation of the Separate Equilibrium Processes That Dictate the Upper Detection Limit of Neutral Ionophore-Based Potentiometric Sensors.

A Heterogeneous Precipitate Based Sodium Membrane Ion Selective Electrode-Its Preparation and Analytical Application

All Solid-State Poly (Vinyl Chloride) Membrane Potentiometric Sensor Integrated with Nano-Beads Imprinted Polymers for Sensitive and Rapid Detection of Bispyribac Herbicide as Organic Pollutant

PVC ion-selective electrodes based on calcium bis-[dialkyl- and di-(4-alkylphenyl) phosphates] and mixed solvent mediators

On the Electroanalytical Detection of Zn Ions by a Novel Schiff Base Ligand-SPCE Sensor

Polymeric Membrane Electrodes Using Calix[4]pyrrole Bis/Tetra-Phosphonate Cavitands As Ionophores for Potentiometric Acetylcholine Sensing with High Selectivity.

Sodium Ion-Selective Membrane Electrode Based on Dibenzopyridino-18-Crown-6

Polymeric Membrane Fluoride-Selective Electrodes Using Lewis Acidic Organo-Antimony(V) Compounds As Ionophores

Hydrogen Bond-Based Macrocyclic And Tripodal Neutral Ionophores For Highly Selective Polymeric Membrane Sulfate-Selective Electrodes