Abstract:Thanks to wavelength flexibility, interferometric filters such as Fabry-Perot interferometers (FPIs) and field-widened Michelson interferometers (FWMIs) have shown great convenience for spectrally separating the molecule and aerosol scattering components in the high-spectral-resolution lidar (HSRL) return signal. In this paper, performance comparisons between the FPI and FWMI as a spectroscopic discrimination filter in HSRL are performed. We first present a theoretical method for spectral transmission analysis and quantitative evaluation on the spectral discrimination. Then the process in determining the parameters of the FPI and FWMI for the performance comparisons is described. The influences from the incident field of view (FOV), the cumulative wavefront error induced by practical imperfections, and the frequency locking error on the spectral discrimination performance of the two filters are discussed in detail. Quantitative analyses demonstrate that FPI can produce higher transmittance while the remarkable spectral discrimination is one of the most appealing advantages of FWMI. As a result of the field-widened design, the FWMI still performs well even under the illumination with large FOV while the FPI is only qualified for a small incident angle. The cumulative wavefront error attaches a great effect on the spectral discrimination performance of the interferometric filters. We suggest if a cumulative wavefront error is less than 0.05 waves RMS, it is beneficial to employ the FWMI; otherwise, FPI may be more proper. Although the FWMI shows much more sensitivity to the frequency locking error, it can outperform the FPI given a locking error less than 0.1 GHz is achieved. In summary, the FWMI is very competent in HSRL applications if these practical engineering and control problems can be solved, theoretically. Some other estimations neglected in this paper can also be carried out through the analytical method illustrated herein.

Parallel Analogy Method for Measuring FRD of the FASOT-IFU

Rapid FRD determination for multiplexed fibre systems -- I. The quasi-near field model and its uncertainties

Development of Method for Polarization Alignment of PANDA Polarization Maintaining Fiber

Comparisons Between Field-Widen Michelson Interferometer and Fabry-Perot Interferometer As the Spectroscopic Filter in High Spectral Resolution Lidar

The Fibre Resolved opticAl and Near-ultraviolet Czerny-Turner Imaging Spectropolarimeter (FRANCIS)

FFT Algorithm-Assisted Polarimetric Twist Sensor

Fiber Optical Cable and Connector System (FOCCoS) for PFS/Subaru

FOCCoS for Subaru PFS

A Stable Spectrum Measurement Method Based on Polarization-Maintaining Fiber Interferometer

Multi-fibers connectors systems for FOCCoS-PFS-Subaru

Point spread function modeling for a free space optical system

Development of an Interferometric Fiber-Optic Sensor and Its Array′s Divide/Combine Polarization-Induced-Fading Eliminated Technique

Statistical Test of Optical Fibers for use in PMAS, the Potsdam Multi-Aperture Spectrophotometer

Method of measuring the chromatic dispersion parameter of optical fibers using a single-arm interferometer and a fiber femtosecond frequency comb

Parallel Cross-Correlation Algorithm for the Fast Interrogation of High-Finesse Fiber-Optic Fabry-Perot Sensors

FiberPol-6D: Spectropolarimetric Integral Field mode for the SAAO 1.9 m Telescope using fibers

High-spatial-resolution OFDR with single interferometer using self-compensation method

Online measurement of birefringence of sensing fibers in the AFOCT system

Tolerance Analysis and Desensitization to Parallelism in Afocal Systems of Fabry-Perot Spectrometers

Low-latency equal optical path difference sampling for multi-field VLWIR interference signals

Solar Observation with the Fourier Transform Spectrometer I : Preliminary Results of the Visible and Near-Infrared Solar Spectrum